|
BD00IA5WEFJ Datasheet, PDF (1/22 Pages) Rohm – 500mA Variable Fixed Output LDO Regulators | |||
|
Datasheet
500mA Variable / Fixed Output
LDO Regulators
BDxxIA5WEFJ
âGeneral Description
BDxxIA5WEFJ series devices are LDO regulators with an output current of 0.5A. The output accuracy is ±1% of the output
voltage. Both fixed and variable output voltage devices are available. The output voltage of the variable output voltage
device can be varied from 0.8 to 4.5V using external resistors. Various fixed output voltage devices that do not use external
resistors are also available. It can be used for a wide range of digital appliance applications. It has a small package type:
HTSOP-J8 (4.90mm x 6.00mm x 1.00mm). These devices have built in over current protection to protect the device when
output is shorted, 0µA shutdown mode and thermal shutdown circuit to protect the device during over load conditions.
These LDO regulators are usable with ceramic capacitors that enable a smaller layout and longer life.
âFeatures
â +/-1% output voltage accuracy
â Built-in Over Current Protection circuit (OCP)
â Built-in Thermal Shut Down circuit (TSD)
â Zero µA Shutdown mode
âPackage
HTSOP-J8
(Typ.) (Typ.) (Max.)
4.90mm x 6.00mm x 1.00mm
âKey Specifications
 Input Power Supply Voltage range:
2.4V to 5.5V
 Output voltage range(Variable type): 0.8V to 4.5V
 Output voltage(Fixed type):
1.0V/1.2V/1.5V/1.8V/2.5V/3.0V/3.3V
 Output current:
0.5A (Max.)
 Shutdown current:
0μA (Typ.)
 Operating temperature range:
-25â to +85â
âTypical Application Circuit
HTSOP-J8
VCC
VO
VCC
VO
CIN
R1
COUT
CIN
VO_S
EN
FB
R2
GND FIN
EN
GND FIN
COUT
CIN,COUT : Ceramic Capacitor
CIN,COUT : Ceramic Capacitor
Output voltage variable type
Output voltage fixed type
âProduct structureï¼Silicon monolithic integrated circuit
www.rohm.com
© 2012 ROHM Co., Ltd. All rights reserved.
TSZ22111ï½¥14ï½¥001
âThis product is not designed with protection against radioactive rays.
1/19
TSZ02201-0R6R0A600440-1-2
21.Dec.2012 Rev.002
|
▷ |