BD00HC0WEFJ_13 Datasheet, PDF (1/20 Pages) Rohm – 1A Variable Output LDO Regulator

Datasheet
1A Variable Output
LDO Regulator
BD00HC0WEFJ
●General Description
BD00HC0WEFJ is a LDO regulator with output current 1.0A. The output accuracy is ±1% of the output voltage. The output
voltage of the variable output voltage device can be varied from 0.8 to 7.0V using external resistors. It has a package type:
HTSOP-J8 (4.90mm x 6.00mm x 1.00mm), and can be used in a wide variety of digital appliances. The device has built in
over current protection to protect the device when output is shorted, 0µA shutdown mode and thermal shutdown circuit to
protect the device during over load conditions. The LDO regulator is usable with ceramic capacitors that enable a smaller
layout and longer life.
●Features
■ +/-1% output voltage accuracy
■ Built-in Over Current Protection circuit (OCP)
■ Built-in Thermal Shut Down circuit (TSD)
■ Zero µA Shutdown mode
●Package
HTSOP-J8
(Typ.) (Typ.) (Max.)
4.90mm x 6.00mm x 1.00mm
●Key Specifications
„ Input Power Supply Voltage range:
„ Output voltage range:
„ Output current:
„ Shutdown current:
„ Operating temperature range:
4.5V to 8.0V
0.8V to 7.0V
1.0A (Max.)
0μA(Typ.)
-25℃ to +85℃
●Typical Application Circuit
V_CC
C_IN
V_O
R1
C_OUT
EN
FB
R2
GND FIN
C_IN,C_OUT : Ceramic Capacitor
HTSOP-J8
●Ordering Information
B D 0 0 H C 0 W E F J - E2
Part
Output
Number voltage
Input
voltage
range
00 : Variable H:10V
Output
current
Shutdown Package
mode
Packaging and forming specification
C0:1.0A “W”：Included EFJ：HTSOP-J8 E2:Emboss tape reel
○Product structure：Silicon monolithic integrated circuit
www.rohm.com
© 2013 ROHM Co., Ltd. All rights reserved.
TSZ22111ï½¥14ï½¥001
○This product is not designed protection against radioactive rays.
1/17
TSZ02201-0R6R0A600060-1-2
17.Jan.2013 Rev.002