BD00HC0WEFJ Datasheet, PDF (1/12 Pages) Rohm – 1A Secondary Variable Output LDO Regulators for Local Power Supplies

Secondary Variable Output LDO Regulator Series for Local Power Supplies
1A Secondary Variable Output
LDO Regulators for Local Power Supplies
BD00HC0WEFJ
No.10026EAT03
●Description
BD00HC0WEFJ is a LDO regulator with output current 1.0A. The output accuracy is ±1% of output voltage. With external
resistance, it is available to set the output voltage at random (from 0.8V to 7.0V) and also provides output voltage fixed
type without external resistance. It is used for the wide applications of digital appliances. It has package type: HTSOP-J8.
Over current protection (for protecting the IC destruction by output short circuit), circuit current ON/OFF switch (for setting
the circuit 0μA at shutdown mode), and thermal shutdown circuit (for protecting IC from heat destruction by over load
condition) are all built in. It is usable for ceramic capacitor and enables to improve smaller set and long-life.
●Features
1) Output current 1.0A
2) High accuracy reference voltage circuit
3) Built-in Over Current Protection circuit (OCP)
4) Built-in Thermal Shut Down circuit (TSD)
5) With shut down switch
6) Output voltage variable type (0.8V to 7.0V)
7) Package: HTSOP-J8
●Output voltage differential Line up
Product name
BD00HC0WEFJ
Variable Package
○ HTSOP-J8
Product name : BD00HC0WEFJ
abc d e
Signal
a
b
c
d
e
Description
Output voltage (V)
00
Variable
Voltage resistance(V)
E
24V
H
10V
F
20V
I
7V
G
15V
Output current (A)
A1
0.1A
C0
1.0A
A3
0.3A
C5
1.5A
A5
0.5A
D0
2.0A
Shutdown switch
“W”
Shutdown switch is built in
“”
Shutdown switch is not built in
Package
EFJ
HTSOP-J8
www.rohm.com
© 2010 ROHM Co., Ltd. All rights reserved.
1/11
2010.04 - Rev.A