BD00HA5WEFJ_13 Datasheet, PDF (1/22 Pages) Rohm – 500mA Variable Fixed Output LDO Regulators

Datasheet
500mA Variable / Fixed Output
LDO Regulators
BDxxHA5WEFJ
●General Description
BDxxHA5WEFJ series devices are LDO regulators with an output current of 0.5A. The output accuracy is ±1% of the output
voltage. Both fixed and variable output voltage devices are available. The output voltage of the variable output voltage
device can be varied from 1.5 to 7.0V using external resistors. Various fixed output voltage devices that do not use external
resistors are also available. It can be used for a wide range of digital appliance applications. It has a small package type:
HTSOP-J8 (4.90mm x 6.00mm x 1.00mm). These devices have built in over current protection to protect the device when
output is shorted, 0µA shutdown mode and thermal shutdown circuit to protect the device during over load conditions.
These LDO regulators are usable with ceramic capacitors that enable a smaller layout and longer life.
●Features
„ +/-1% output voltage accuracy
„ Built-in Over Current Protection circuit (OCP)
„ Built-in Thermal Shut Down circuit (TSD)
„ Zero µA Shutdown mode
●Package
HTSOP-J8
(Typ.) (Typ.) (Max.)
4.90mm x 6.00mm x 1.00mm
●Key Specification
„ Input Power Supply Voltage range:
4.5V to 8.0V
„ Output voltage range(Variable type): 1.5V to7.0V
„ Output voltage(Fixed type):
1.5V/1.8V/2.5V/3.0V /3.3V/5.0V/6.0V/7.0V
„ Output current:
0.5A(Max.)
„ Shutdown current:
0μA(Typ.)
„ Operating temperature range:
-25℃ to +85℃
HTSOP-J8
●Typical Application Circuit
V_CC
C_IN
V_O
R1
EN
FB
R2
GND FIN
C_IN,C_OUT : Ceramic Capacitor
Output voltage variable type
C_OUT
C_IN
V_CC
EN
GND
V_O
V_{O_S}
FIN
C_IN,C_OUT : Ceramic Capacitor
Output voltage fixed type
C_OUT
○Product structure：Silicon monolithic integrated circuit
www.rohm.com
© 2013 ROHM Co., Ltd. All rights reserved.
TSZ22111ï½¥14ï½¥001
○This product is not designed protection against radioactive rays.
1/19
TSZ02201-0R6R0A600320-1-2
11.Jan.2013 Rev.002