BD00GC0WEFJ-E2 Datasheet, PDF (1/22 Pages) Rohm – 1A Variable Fixed Output LDO Regulator

Datasheet
1A Variable / Fixed Output
LDO Regulator
BDxxGC0WEFJ
●General Description
BDxxGC0WEFJ is a LDO regulator with output current 1.0A. The output accuracy is ±1% of output voltage. With external
resistance, it is available to set the output voltage at random (from 1.5V to 13.0V) and also provides output voltage fixed
type without external resistance. It is used for the wide applications of digital appliances. It has package type: HTSOP-J8.
Over current protection (for protecting the IC destruction by output short circuit), circuit current ON/OFF switch (for setting
the circuit 0μA at shutdown mode), and thermal shutdown circuit (for protecting IC from heat destruction by over load
condition) are all built in. It is usable for ceramic capacitor and enables to improve smaller set and long-life.
●Features
„ High accuracy reference voltage circuit
„ Built-in Over Current Protection circuit (OCP)
„ Built-in Thermal Shut Down circuit (TSD)
„ With shut down switch
●Key Specifications
„ Input Power Supply Voltage range: 4.5V to 14.0V
„ Output voltage range(Variable type): 1.5V to 13.0V
„ Output voltage(Fixed type): 1.5V/1.8V/2.5V/3.0V/3.3V
5.0V/6.0V/7.0V/8.0V/9.0V/10V/12V
„ Output current:
1.0A(Max.)
„ Shutdown current:
0μA(Typ.)
„ Operating temperature range:
-25℃ to +85℃
●Package
HTSOP-J8
●Typical Application Circuit
(Typ.) (Typ.) (Max.)
4.90mm x 6.00 mm x 1.00mm
HTSOP-J8
V_CC
C_IN
V_O
R1
EN
FB
R2
GND FIN
C_IN,C_OUT : Ceramic Capacitor
Output voltage variable type
C_OUT
C_IN
V_CC
EN
GND
V_O
V_{O_S}
FIN
C_IN,C_OUT : Ceramic Capacitor
Output voltage fixed type
C_OUT
○Product structure：Silicon monolithic integrated circuit
www.rohm.com
© 2012 ROHM Co., Ltd. All rights reserved.
TSZ22111ï½¥14ï½¥001
○This product is not designed protection against radioactive rays.
1/19
TSZ02201-0R6R0A600200-1-2
25.July.2012 Rev.001