BD00D0AWHFP_11 Datasheet, PDF (1/12 Pages) Rohm – 2A Standard Variable Output LDO Regulator

Standard Variable Output LDO Regulators
2A Standard
Variable Output LDO Regulator
BD00D0AWHFP
No.11023EBT04
●Description
The BD00D0AWHFP is low-saturation regulator. The output voltage can be arbitrarily configured using the external
resistance. This IC has a built-in over-current protection circuit that prevents the destruction of the IC due to output short
circuits and a thermal shutdown circuit that protects the IC from thermal damage due to overloading.
●Features
1) Output Current : 2A
2) High Output Voltage Precision : ±1%
3) Low saturation with PDMOS output
4) Built-in over-current protection circuit that prevents the destruction of the IC due to output short circuits
5) Built-in thermal shutdown circuit for protecting the IC from thermal damage due to overloading
6) Low ESR Capacitor
7) HRP5 packaging
●Applications
Audiovisual equipments, FPDs, televisions, personal computers or any other consumer device
●Absolute maximum ratings (Ta=25℃)
Parameter
Supply Voltage
Symbol
Ratings
Unit
*1
Vcc
-0.3～+35.0
V
Output Control Voltage
V_CTL
-0.3～+35.0
V
Power Dissipation
*2
Pd
1.6
W
Operating Temperature Range
Topr
-40～+105
℃
Storage Temperature Range
Tstg
-55～+150
℃
Maximum Junction Temperature Tjmax
+150
℃
*1 Not to exceed Pd.
*2 HRP5: Reduced by 12.8mW / ℃ over Ta = 25℃, when mounted on glass epoxy board: 70mm×70mm×1.6mm.
NOTE: This product is not designed for protection against radioactive rays.
●Operating conditions (Ta=25℃)
Parameter
Symbol Min.
Max.
Unit
Supply Voltage
Vcc
4.0
25.0
V
Output Control Voltage
Output Current
V_CTL
0
25.0
V
Io
0
2.0
A
Output Voltage
Vo
3.0
15.0
V
www.rohm.com
© 2011 ROHM Co., Ltd. All rights reserved.
1/11
2011.03 - Rev.A