|
BD00C0AWFP Datasheet, PDF (1/12 Pages) Rohm – 1A Standard Variable Output LDO Regulators | |||
|
Standard Variable Output LDO Regulators
1A Standard
Variable Output LDO Regulators
BD00C0AWFP,BD00C0AWCP-V5
No.11023EBT03
âDescription
The BD00C0AW Series is low-saturation regulators. The output voltage can be arbitrarily configured using the external resistance.
This IC has a built-in over-current protection circuit that prevents the destruction of the IC due to output short circuits and a
thermal shutdown circuit that protects the IC from thermal damage due to overloading.
âFeatures
1) Output Current: 1A
2) High Output Voltage Precision : ±1%
3) Low saturation with PDMOS output
4) Built-in over-current protection circuit that prevents the destruction of the IC due to output short circuits
5) Built-in thermal shutdown circuit for protecting the IC from thermal damage due to overloading
6) Low ESR Capacitor
7) TO252-5,TO220CP-V5 packaging
âApplications
Audiovisual equipments, FPDs, televisions, personal computers or any other consumer device
âAbsolute maximum ratings (Ta=25â)
Parameter
Symbol
Ratings
Unit
Supply Voltage
*1
Vcc
-0.3 ~ +35.0
V
Output Control Voltage
VCTL
-0.3 ~ +35.0
V
Power Dissipation (TO252-5) *2
Pd
1.3
W
Power Dissipation (TO220CP-V5)*3
Pd
1.85
W
Operating Temperature Range
Topr
-40 ~ +105
â
Storage Temperature Range
Tstg
-55 ~ +150
â
Maximum Junction Temperature
Tjmax
+150
â
*1 Not to exceed Pd.
*2 TO252-5:Reduced by 10.4mW / â over Ta = 25â, when mounted on glass epoxy board: 70mmÃ70mmÃ1.6mm.
*3 TO220CP-V5:Reduced by 14.8mW / â over Ta = 25â, when Itâs without Aluminium heat dissipation board.
NOTE : This product is not designed for protection against radioactive rays.
âOperating conditions (Ta=25â)
Parameter
Symbol
Min.
Max.
Unit
Supply Voltage
Vcc
4.0
26.5
V
Output Control Voltage
Output Current
VCTL
0
Io
0
26.5
V
1.0
A
Output Voltage
Vo
3.0
15.0
V
www.rohm.com
© 2011 ROHM Co., Ltd. All rights reserved.
1/11
2011.08 - Rev.B
|
▷ |