BA8522RF-E2 Datasheet, PDF (1/26 Pages) Rohm – Low Noise Operational Amplifiers

Datasheet
Operational Amplifiers
Low Noise Operational Amplifiers
BA8522Rxxx
General Description
BA8522Rxxx are low noise operational amplifiers of
high voltage gain. It excels especially in input referred
noise voltage (9 nV/ Hz ), total harmonic distortion
(0.002%) and operating voltage range (±2V to ±16V)
and it is the most suitable operational amplifier with
audio equipment.
Features
 High Voltage Gain
 Low Input Referred Noise Voltage
 Low Total Harmonic Distortion
 Low Input Offset Voltage
 Wide Operating Supply Voltage
 Wide Operating Temperature Range
Key Specifications
 Operating Supply Voltage (split supply):
 Temperature Range:
 Input Offset Voltage:
 Slew Rate:
 Total Harmonic Distortion:
±2V to ±16V
-40°C to +105°C
±1.5mV(Max)
3V/µs(Typ)
0.002%(Typ)
 Input Referred Noise Voltage:
9 nV/ Hz (Typ)
Packages
SOP8
SSOP-B8
MSOP8
W(Typ) x D(Typ) x H(Max)
5.00mm x 6.20mm x 1.71mm
3.00mm x 6.40mm x 1.35mm
2.90mm x 4.00mm x 0.90mm
Application
 Audio Application
 Consumer Equipment
 Active Filter
Simplified Schematic
VCC
-IN
OUT
+IN
VEE
Figure 1. Simplified schematic (1 channel only)
〇Product structure : Silicon monolithic integrated circuit 〇This product has no designed protection against radioactive rays
www.rohm.com
© 2013 ROHM Co., Ltd. All rights reserved.
TSZ22111 • 14 • 001
1/22
TSZ02201-0RAR1G200040-1-2
13.Sep.2013 Rev.001