|
BA7654F Datasheet, PDF (1/10 Pages) Rohm – 2-input, 1-output video signal switcher | |||
|
High-performance Video Signal Switchers
Single-circuit
Video Switchers
BA7654F,BA7653AF,BA7653AFV,BA7652AF
No.11066EAT04
âDescription
The BA7654F, BA7653A F/FV or BA7652AF is a video signal (display signal) switch containing one 2-input or 3-input circuit.
Each of the input pin formats is âsync-tip clamp inputâ that matches the synchronous tips of video signals (display signals) to
the same potential. The inputs have an high input impedance configuration, in which they can utilize a small clamp capacitor
(0.01 µF (FZ) ceramic capacitor is recommended).
âFeatures
1) Low value clamp capacitance can be used (Min. 3000 pF Recommended 0.01µF (FZ) ceramic capacitor)
2) Low voltage operation is possible (Operating range 4.0ï½7.0V)
3) Superimposed can be applied since switching speed of SW is fast and there is little switching noise (Typ. 70ns)
4) Low power consumption (Typ. 25mW when Vcc=5V)
5) Large dynamic range (Typ. 3.1VP-P when Vcc=5V)
6) Good frequency characteristics (Typ. 10 MHz 0 dB)
7) Low interchannel crosstalk (Typ. â70 dB)
8) Voltage can be applied to the CTL pin without a VCC voltage.
9) Built-in mute function (BA7652AF)
âApplications
VCR, TV, and other applications that use display signals.
âProduct lineup
Part No.
BA7654F
BA7653AF, BA7653AFV
BA7652AF
Input type
2 in 1 Circuit
3 in 1 Circuit
3 in 1 Circuit
Mute
ï¼
ï¼
â
Supply voltage(V)
4.0 ï½ 7.0
âAbsolute maximum ratings(Ta=25â)
Parameter
Symbol
Supply voltage
VCC
Power dissipation
Pd
BA7654F
500*1
Ratings
Unit
BA7653AF BA7653AFV BA7652AF
9
V
500*1
350*2
500*1
mW
Operating temperature
Topr
-25ï½+75
-30ï½+80
-30ï½+80
-30ï½+80
â
Storage temperature
Tstg
-55ï½+125
â
*1 Reduce by 5.0mW/â over 25â, when mounted on a 50mmÃ50mm PCB board.(BA7654F, BA7653AF, BA7652AF)
*2 Reduce by 3.5mW/â over 25â, when mounted on a 50mmÃ50mm PCB board.(BA7653AFV)
www.rohm.com
© 2011 ROHM Co., Ltd. All rights reserved.
1/9
2011.04 - Rev.A
|
▷ |