BA7652AF Datasheet, PDF (1/6 Pages) Rohm – Video signal swither, 1 x 3-channel with clamped-input

Multimedia ICs
Video signal swither, 1 × 3-channel
with clamped-input
BA7652AF
The BA7652AF is a video-signal switching IC that contains a three-channel clamped-input multiplexer and a built-in
mute circuit. The inputs are sync-tip clamped (synchronous edge of the video input signals are aligned to the same
voltage), and as the input impedance is extremely large, it is possible to use a small value for the clamp capacitor.
[The recommended capacitor is 0.01µF (FZ) ceramic].
•^Applications
Video cassette recorders and camcorders
•^Features
1) Small clamp capacitors can be used (ceramic,
3000pF (Min.), 0.01µF (FZ) (recommended)).
2) Low supply voltage operation possible. Supply volt-
age range is 3.7V to 7.7V.
3) Superimposition used for fast switching speed with
low switching noise (70ns. Typ.).
4) Low power consumption
(when VCC = 5V, 25mW Typ.).
5) Wide dynamic range (3.1VP-P Typ. for VCC = 5V).
6) Mute function.
7) Excellent frequency characteristics
(10MHz, 0dB Typ.).
8) Low interchannel crosstalk ( – 70dB Typ.).
9) Voltage can be applied to the control pins even
when VCC is not applied.
•^{Absolute maximum ratings (Ta = 25°C)}
Parameter
Symbol
Limits
Unit
Applied voltage
Power dissipation
VCC
9
V
Pd
500^∗
mW
Operating temperature
Topr
– 25 ~ + 75
°C
Storage temperature
Tstg
– 55 ~ + 125
°C
∗ When mounted on a 50mm × 50mm board, reduced by 5.0mW for each increase in Ta of 1°C over 25°C.
•^{Recommended operating conditions (Ta = 25°C)}
Parameter
Symbol
Limits
Unit
Recommended operating voltage
VCC
4.0 ~ 7.0
V
1