|
BA7622F_09 Datasheet, PDF (1/17 Pages) Rohm – Standard 3-output Video Driver | |||
|
High-performance Video Driver Series
Standard 3-output
Video Driver
BA7622F, BA7623F
No.09065EAT04
âDescription
The BA7622F and BA7623F are video driver ICs with three built-in circuits, developed for video equipment. The three circuits
in the BA7622F, two sync-tip clamp inputs and one bias input, are terminated by internal resistances of 20 kΩ. The BA7623F
output pins cab be connected directly in a DC coupling mode. Each output can drive 2 lines of load (75â¦x2).
Suitable to connect to a 2Vpp output type signal processing LSI and DAC.
âFeatures
Common
1) 2 lines can be driven from each output
2) Can be operated by Vcc=4.5 V
BA7622F
1) Large output dynamic range (3.3 Vpp, Vcc=5 V)
2) Built-in, 2 clamp input circuits and1 bias input circuit
3) Y signal, C signal, and composite video signal can be driven simultaneously by this particular IC.
BA7623F
1) Wide output dynamic range (3.3 Vpp, Vcc=5 V)
2) Can be directly connected to previous stage circuit
âApplications
TV, VCR, camcorder, and other video equipment.
âProduct lineup
Parameter
Input pin configuration
BA7622F
2 clamp input circuits
1 bias input circuit
âAbsolute maximum ratingsï¼Ta=25âï¼
BA7623F
Previous stage direct connection
(Base direct input)
Parameter
Supply voltage
Power dissipation
Operating temperature
Storage temperature
25ï°C
Symbol
VMax
Pd
Topr
Tstg
Limits
8.0
550 *1
-25ï½+75
-55ï½+125
Unit
V
ï½W
â
â
*1 Reduce by 5.5 mW/ï°C over
www.rohm.com
© 2009 ROHM Co., Ltd. All rights reserved.
1/16
2009.04 - Rev.A
|
▷ |