BA4580YFM Datasheet, PDF (1/30 Pages) Rohm – Automotive Low Noise Operational Amplifiers

Datasheet
Operational Amplifier Series
Automotive Low Noise
Operational Amplifiers
BA4580Yxxx-M, BA4584YFV-M
●General Description
BA4580Yxxx-M, BA4584YFV-M integrate two or four
independent Op-Amps on a single chip. These
Op-Amp have some features of low noise and low
distortion characteristics and can operate from ±2.0V
to ±16V(split supply).
BA4560Yxxx-M, BA4584YFV-M are manufactured for
automotive requirements of car navigation system, car
audio, etc.
●Features
 AEC-Q100 Qualified
 High voltage gain
 low noise
 low distortion
 Wide operating supply voltage
 Internal ESD protection circuit
 Wide operating temperature Range
●Application
 Car Navigation System
 Car Audio
●Key Specifications
 Wide operating supply voltage
(split supply):±2.0V to ±16V
 Wide Temperature Range:
-40℃ to +105℃
 High Slew Rate:
5V/µs(Typ.)
 Total Harmonic Distortion:
0.0005%(Typ.)
 Input Referred Noise Voltage:
5 nV/ Hz (Typ.)
●Packages
SOP8
MSOP8
SSOP-B14
W(Typ.) xD(Typ.) xH(Max.)
5.00mm x 6.20mm x 1.71mm
2.90mm x 4.00mm x 0.90mm
5.00mm x 6.40mm x 1.35mm
●Simplified schematic
VCVCC
-－ININ
+＋IN^IN
VOUT
VVEEEE
Figure 1. Simplified schematic (one channel only)
○Product structure：Silicon monolithic integrated circuit ○This product is not designed protection against radioactive rays.
www.rohm.com
©2013 ROHM Co., Ltd. All rights reserved.
TSZ22111ï½¥14ï½¥001
1/27
TSZ02201-0RAR1G200500-1-2
25.Mar.2013 Rev.002