BA4560FJ-E2 Datasheet, PDF (1/44 Pages) Rohm – Low Noise Operational Amplifiers

Datasheet
Operational Amplifiers
Low Noise Operational Amplifiers
BA4560xxx, BA4560Rxxx, BA4564RFV, BA4564WFV
●General Description
Normal BA4560 and high-reliability BA4560R / BA4564R/BA4564W integrate two or four independent Op-Amps on a single
chip. Especially, this series is suitable for any audio applications due to low noise and low distortion characteristics and
there are usable for other many applications by wide operating supply voltage range.
BA4560R / BA4564R / BA4564W are high-reliability products with extended operating temperature range and high ESD
tolerance.
●Features
 High voltage gain, low noise, low distortion
 Wide operating supply voltage
 Internal ESD protection circuit
 Wide Operating Temperature Range
●Packages
W(Typ.) x D(Typ.) x H(Max.)
SOP8
5.00mm x 6.20mm x 1.71mm
MSOP8
2.90mm x 4.00mm x 0.90mm
SSOP-B8
3.00mm x 6.40mm x 1.35mm
TSSOP-B8
3.00mm x 6.40mm x 1.00mm
SOP-J8
4.90mm x 6.00mm x 1.65mm
SSOP-B14
5.00mm x 6.40mm x 1.35mm
●Key Specification
 Wide Operating Supply Voltage
(split supply):±4V to ±15V
 Wide Temperature Range:
BA4560
-40°C to +85°C
BA4560R/BA4564R/BA4564W
 High Slew Rate:
 Total Harmonic Distortion:
-40°C to +105°C
4V/µs(typ.)
0.003%(typ.)
 Input Referred Noise Voltage:
 Low Offset Voltage:
8 nV/ Hz (typ.)
BA4564W
2.5mV(max.)
●Selection Guide
Maximum Operation Temperature
Normal
Dual
Slew Rate
4V/µs
+85°C
BA4560F
BA4560FJ
BA4560FV
BA4560FVT
BA4560FVM
High Reliability
●Block Diagram _VCC
Dual
Slew Rate
4V/µs
Quad
4V/µs
+105°C
BA4560RF
BA4560RFJ
BA4560RFV
BA4560RFVT
BA4560RFVM
BA4564RFV
BA4564WFV
－IN
VOUT
＋IN
VEE
Fig. 1 Simplified schematic
○Product structure：Silicon monolithic integrated circuit ○This product is not designed protection against radioactive rays.
www.rohm.com
© 2012 ROHM Co., Ltd. All rights reserved.
TSZ22111ï½¥14ï½¥00
1/41
TSZ02201-0RAR1G200020-1-2
7.SEP.2012 Rev.002