BA4560F-E2_14 Datasheet, PDF (1/52 Pages) Rohm – Low Noise Operational Amplifiers

Datasheet
Operational Amplifiers
Low Noise Operational Amplifiers
BA4560xxx BA4560Rxxx BA4564RFV BA4564WFV
General Description
BA4560xxx for normal grade and BA4560Rxxx,
BA4564RFV, BA4564WFV for high-reliability grade
integrate two or four high voltage gain Op-Amps on a
single chip. Especially, this series is suitable for any
audio applications due to low noise and low distortion
characteristics and they are usable for other many
applications of wide operating supply voltage
range.BA4560Rxxx, BA4564RFV, BA4564WFV are
high-reliability products with extended operating
temperature range.
Features
 High Voltage Gain, Low Noise, Low Distortion
 Wide Operating Supply Voltage Range
 Wide Operating Temperature Range
Packages
SOP8
SOP-J8
TSSOP-B8
MSOP8
SOP14
SSOP-B14
W(Typ) x D(Typ) x H(Max)
5.00mm x 6.20mm x 1.71mm
4.90mm x 6.00mm x 1.65mm
3.00mm x 6.40mm x 1.20mm
2.90mm x 4.00mm x 0.90mm
8.70mm x 6.20mm x 1.71mm
5.00mm x 6.40mm x 1.35mm
Key Specification
 Operating Supply Voltage
(Split Supply):±4V to ±15V
 Temperature Range:
BA4560xxx
-40°C to +85°C
BA4560Rxxx,BA4564RFV,BA4564WFV
-40°C to +105°C
 Slew Rate:
4V/µs(Typ)
 Total Harmonic Distortion:
0.003%(Typ)
 Input Referred Noise Voltage:
8 nV/ Hz (Typ)
 Offset Voltage:
BA4564WFV
2.5mV(Max)
Selection Guide
Normal
High Reliability
Simplified Schematic
VCC
Dual
Dual
Quad
Maximum Operation Temperature
Slew Rate
+85°C
4V/µs
BA4560F
BA4560FJ
BA4560FV
BA4560FVT
BA4560FVM
Slew Rate
4V/µs
4V/µs
+105°C
BA4560RF
BA4560RFJ
BA4560RFV
BA4560RFVT
BA4560RFVM
BA4564RFV
BA4564WFV
－IN
VOUT
＋IN
VEE
Figure 1. Simplified Schematic
○Product structure：Silicon monolithic integrated circuit ○This product is not designed protection against radioactive rays.
www.rohm.com
© 2012 ROHM Co., Ltd. All rights reserved.
TSZ22111ï½¥14ï½¥00
1/48
TSZ02201-0RAR1G200020-1-2
19.Nov.2014 Rev.003