BA4558YFV-M Datasheet, PDF (1/20 Pages) Rohm – Automotive Low Noise Operational Amplifiers

Operational Amplifier Series
Automotive Low Noise
Operational Amplifiers
BA4558Yxxx-M
●General Description
BA4558Yxxx-M integrates two independent Op-Amps
on a single chip. This Op-Amp has some features of
low noise and low distortion characteristics and can
operate from ±4.0V to ±15V(split supply).
BA4558Yxxx-M is manufactured for automotive
requirements of car navigation system, car audio, etc.
●Features
 AEC-Q100 Qualified
 High voltage gain
 low noise
 low distortion
 Wide operating supply voltage
 Internal ESD protection circuit
 Wide operating temperature Range
●Application
 Car Navigation System
 Car Audio
●Simplified schematic
●Key Specifications
 Wide operating supply voltage
(split supply):±4.0V to ±15V
 Wide Temperature Range:
-40°C to +105°C
 High Slew Rate:
1V/µs(Typ.)
 Total Harmonic Distortion :
0.005%(Typ.)
 Input Referred Noise Voltage :
12 nV/ Hz (Typ.)
●Packages
SOP8
SSOP-B8
MSOP8
W(Typ.) x D(Typ.) x (Max.)
5.00mm x 6.20mm x 1.71mm
3.00mm x 6.40mm x 1.35mm
2.90mm x 4.00mm x 0.90mm
VCC
－IN
VOUT
＋IN
VEE
Figure 1. Simplified schematic (one channel only)
○Product structure：Silicon monolithic integrated circuit ○This product is not designed protection against radioactive rays.
www.rohm.com © 2013 ROHM Co., Ltd. All rights reserved.
TSZ22111ï½¥14ï½¥001
1/17
TSZ02201-0RAR1G200630-1-2
20.Feb.2013 Rev.001