|
BA3662CP-V5_1010 Datasheet, PDF (1/12 Pages) Rohm – 300mA Standard Variable Output LDO Regulator | |||
|
Standard Variable Output LDO Regulators
300mA Standard
Variable Output LDO Regulator
BA3662CP-V5
No.10023EAT05
âDescription
The BA3662CP-V5 is low-saturation regulator. The output voltage can be arbitrarily configured using the external resistance.
This IC has a built-in over-current protection circuit that prevents the destruction of the IC due to output short circuits and a
thermal shutdown circuit that protects the IC from thermal damage due to overloading.
âFeatures
1) Output Current: 300mA
2) High Output Voltage Precision : ±2%
3) Low saturation with PNP output
4) Built-in over-current protection circuit that prevents the destruction of the IC due to output short circuits
5) Built-in thermal shutdown circuit for protecting the IC from thermal damage due to overloading
6) Built-in over- voltage protection circuit that prevents the destruction of the IC due to power supply surges
7) TO220CP-V5 packaging
âApplications
Audiovisual equipments, FPDs, televisions, personal computers or any other consumer device
âAbsolute Maximum Ratings (Ta=25â)
Parameter
Symbol
Ratings
Unit
Supply Voltage
â»1
Vcc
-0.3ï½+35.0
V
Output Control Voltage
VCTL
Power Dissipation
â»2
Pd
-0.3ï½+Vcc
V
2000
mW
Operating Temperature Range
Topr
-40ï½+125
â
Storage Temperature Range
Tstg
-55ï½+150
â
Maximum Junction
Temperature
Tjmax
+150
â
Peak Supply Voltage
â»3
Vcc
peak
+50
V
â» 1 Not to exceed Pd.
â» 2 TO220CP-V5:Derating in done at 16mW/â for operating above Taâ§25â.(without heat sink)
â» 3 Applied voltage : 200msec or less (trâ¥1msec)
NOTE : This product is not designed for protection against radioactive rays.
50V
35V
0V
trâ§1msec
MAX200msec
(Voltage Supply more than 35V)
www.rohm.com
© 2010 ROHM Co., Ltd. All rights reserved.
1/11
2010.10 - Rev.A
|
▷ |