|
BA3258HFP_09 Datasheet, PDF (1/9 Pages) Rohm – Dual-output Secondary Fixed Output LDO Regulators for Local Power Supplies | |||
|
Secondary Fixed Output LDO Regulator Series for Local Power Supplies
Dual-output Secondary Fixed Output
LDO Regulators for Local Power Supplies
BA3258HFP, BA33D15HFP, BA33D18HFP
No.09026EAT01
ïDescription
The BA3258HFP, BA33D15HFP, BA33D18HFP are fixed 2-output low-saturation regulators with a voltage accuracy at both
outputs of ï±2%. These series incorporate both overcurrent protection and thermal shutdown (TSD) circuits in order to
prevent damage due to output short-circuiting and overloading, respectively.
ïFeatures
1) Output voltage accuracy: ï±2%.
2) Output current capacity: 1A (BA3258HFP), 0.5A (BA33Dâ¡â¡ Series)
3) A ceramic capacitor can be used to prevent output oscillation (BA3258HFP).
4) High Ripple Rejection (BA33Dâ¡â¡ Series)
5) Built-in thermal shutdown circuit
6) Built-in overcurrent protection circuit
ïApplications
FPDs, TVs, PCs, DSPs in DVDs and CDs
ïProduct Lineup
Part Number
BA3258HFP
BA33D15HFP
BA33D18HFP
Output voltage
Vo1
3.3 V
3.3 V
3.3 V
Output voltage
Vo2
1.5 V
1.5 V
1.8 V
Current capability
Io1
1A
0.5 A
0.5 A
Current capability
Io2
1A
0.5 A
0.5 A
Package
HRP5
HRP5
HRP5
ïAbsolute Maximum Ratings
BA3258HFP
BA33Dâ¡â¡ Series
Parameter
Symbol
Limits
Units
Parameters
Symbol
Applied voltage
VCC
15*1
V
Applied voltage
VCC
Power dissipation
Pd
2300*2
mW
Power dissipation
Pd
Operating
temperature range
Topr
â30 to 85
â
Operating
temperature range
Topr
Ambient storage
temperature
Tstg
â55 to 150
â
Ambient storage
temperature
Tstg
Maximum junction
temperature
Tjmax
150
â
Maximum junction
temperature
Tjmax
*1 Must not exceed Pd
*2. Derated at 18.4 mW/â at Ta>25â when mounted on a glass epoxy board (70 mm ï´ 70 mm ï´ 1.6 mm)
Limits
18*1
2300*2
â25 to 105
â55 to 150
150
Units
V
mW
â
â
â
ïRecommended Operating Conditions
BA3258HFP
Parameter
Symbol Min. Typ. Max. Unit
Input power supply
voltage
VCC 4.75 - 14.0 V
3.3 V output current
Io1
-
-
1A
BA33Dâ¡â¡Series
Parameter
Input power supply
voltage
Symbol Min. Typ. Max. Unit
VCC
4.1
- 16.0 V
3.3 V output current Io1
-
- 0.5 A
1.5 V output current
Io2
-
-
1 A 1.5V output current
Io2
-
- 0.5 A
1.8 V output current Io2
-
- 0.5 A
www.rohm.co
© 2009 ROHM Co., Ltd. All rights reserved.
1/8
2009.04 - Rev.A
|
▷ |