BA15218 Datasheet, PDF (1/5 Pages) Rohm – Dual high slew rate, low noise operational amplifier

Standaed ICs
Dual high slew rate, low noise
operational amplifier
BA15218 / BA15218F / BA15218N
The BA15218, BA15218F, and BA15218N are monolithic ICs with two built-in low-noise, low-distortion operational
amplifiers featuring internal phase compensation.
Either a dual or single power supply can be driven, and these products can be driven by a digital system 5V single
power supply.
The following packages are available: 8-pin DIP (BA15218), 8-pin SOP (BA15218F), and 8-pin SIP (BA15218N).
•^Features
1) Low-voltage operation and single power supply drive
enabled.
(Single power supply: 4 to 32V, dual power supply:
±3 to ±16V)
2) Low noise level. (Vn = 1.0µVrms typ. : RIAA)
3) High slew rate. (SR = 3V / µs, GBW = 10MHz typ.)
4) Low offset voltage. (VIO = 0.5mV typ.)
5) High gain and low distortion. (GVO = 110dB, THD =
0.0015%)
6) Pin connections are the same as with standard dual
operational amplifiers, and outstanding characteris-
tics make these products compatible with the 4558
and 4560 models.
•^{Block diagram}
BA15218 / BA15218F
BA15218N
OUT1 1
8 VCC
– IN1 2
+ IN1 3
1ch
–+
2ch
+–
7 OUT2
6 – IN2
VEE 4
5 + IN2
+
+
1ch
2ch
–
–
1