|
BA03CC0WT_11 Datasheet, PDF (1/12 Pages) Rohm – Standard Fixed Output LDO Regulators | |||
|
Standard LDO Regulators
Standard Fixed Output
LDO Regulators
BAâ¡â¡DD0 Series, BAâ¡â¡CC0 Series
Standard Fixed Output
LDO Regulators with Shutdown Switch
BAâ¡â¡DD0W and,BAâ¡â¡CC0W Series
No.11021ECT01
âDescription
Standard Fixed Output LDO Regulators are low-saturation regulators, available for output s up to 2A / 1A. ROHM has a wide
output voltage range and package lineup with and without shutdown switches. This IC has a built-in over-current protection
circuit that prevents the destruction of the IC due to output short circuits, a thermal shut-down circuit that protects the IC from
damage due to overloading and an over-voltage protection circuit that protects the IC from surges generated in the power
supply line of the IC.
âFeatures
1) Maximum output current : 2A (BAâ¡â¡DD0),1A(BAâ¡â¡CC0)
2) ±1% highly accurate output voltage (BAâ¡â¡DD0)
3) Low saturation with PNP output
4) Built-in over-current protection circuit that prevents the destruction of the IC due to output short circuits
5) Built-in thermal shutdown circuit for protecting the IC from damage due to overloading
6) Built-in over- voltage protection circuit that prevents the destruction of the IC due to power supply surges
7) TO220FP and HRP5 packaging (BAâ¡â¡DD0) ,TO220FP and TO252 packaging(BAâ¡â¡CC0)
âApplications
Used in DSP power supplies for DVD and CD players, FPDs, televisions, personal computers or any other consumer device
www.rohm.com
© 2011 ROHM Co., Ltd. All rights reserved.
1/11
2011.03 - Rev.C
|
▷ |