1MX06-063-05 Datasheet, PDF (4/4 Pages) RMT Ltd. – Thermoelectric module

Thermoelectric module Datasheet
1MX06-063-15
RMT Ltd.
Standard Performance Plots
Applications Tips
Color Legend: Imax, 0.8 Imax, 0.6 Imax, 0.4 Imax
Cautions
1. Do not heat TE module more than 200^oC (TEC assembled
at 230^oC) or 160^oC (optional TECs assembled at 183^oC).
2. Do not use TE module without attached heat sink at hot
(bottom) side.
3. Connect TE sub-mount to a DC power supply in
acccordance to polarity.
4. Do not apply DC current higher than Imax.
Installation
1. Mechanical Mounting
TEC is placed between two heat exchangers . This construction is fixed by screws or in another
mechanical way. It is suitable for large modules (with dimensions 30mmx30mm and larger).
2. Soldering
This method is suitable for a TE module with metallized outside surfaces (cold and hot sides).
RMT provides this option and also makes pre-tinning for TE modules.
3. Glueing
A glue is usually based on some epoxy compound filled with some thermoconductive material such
as graphite or diamond powders, silver, SiN and others. The application of a specific type depends
on application features and the type of a TE module.
Definitions
Value
DTmax
Qmax
Imax
Umax
Rt
-xx
Thot
H
Description
Maximum temperature difference at I=Imax
Maximum heat pumping capacity at I=Imax
Maximum current
Maximum voltage drop
Header thermal resistance
Thermoelectric pellet length code
TEC hot side temperature
Total TEC height
Notes
rated at Qmax=0, at other Q it should be estimated as DT=DTmax(1-Q/Qmax)
rated at DT=0, at other DT it should be estimated as Q=Qmax(1-DT/DTmax)
Electric parameters resulting in greatest DTmax
Pellet length is "-xx" x 10 (in mm)
Performance data shown in specifications are given for Thot=300 K, vacuum
All dimensions are given in mm
Copyright 2007. RMT Ltd. The design and specifications of products can be changed by RMT Ltd. without notice.
5