2MP04-032 Datasheet, PDF (1/4 Pages) RMT Ltd. – Specifications

Specifications
2MP04-032 Series
Type
∆Tmax Qmax Imax Umax _{AC R H}
h
K
W
A
V ^{Ohm mm mm}
2MP04-032-xx (N=32+32)
2МP04-032-10 93 0.83 1.68 1.64 0.79 3.2 1
2МP04-032-12 95 0.76 1.68 1.72 0.83 3.4 1.2
2МP04-032-15 98 0.66 1.68 1.80 0.86 3.7 1.5
Perfomance data are given for T_hot=300K vacuum
Technical Drawing
RMT Ltd.
Ordering Options
A. TEC Assembly:
1.Solder PbSn (Tmelt=183°C)
2.Solder SnSb (Tmelt=230°C)
B. Ceramics:
1.Pure Al2O3 (100%)
2.Alumina (Al2O3 - 96%)
3.Aluminum Nitride (AlN)
C. Surface Finish (one or both):
D. Thermistor can be mounted
1. Clear ceramics
on edge of cold side ceramics
2. Metallized:
Calibration is available.
2.1 Ni / Sn(Bi)
2.2 Gold plating
3. Metallized and pre-tinned:
3.1 Rose alloy (Pb-Sn-Bi, Tmelt=94°C)
3.2 Solder 117 (In-Sn, Tmelt=117°C)
3.3 Solder 138 (Sn-Bi, Tmelt=138°C)
3.4 Solder 183 (Pb-Sn, Tmelt=183°C)
Copyright 2005. RMT Ltd. The design and specifications of products can be changed by RMT Ltd. without notice.
423
RMTK 190.00.00