1MDL06035 Datasheet, PDF (1/5 Pages) RMT Ltd. – 1MDL06 Series of Miniature Thermoelectric Coolers for telecom applications.

Thermoelectric Module Datasheet
RMT Ltd
Performance Parameters
1MDL06-035-XX
Type
ΔTmax Q_max I_max U_max AC R H
K W A V Ohm mm
1MDL06-035-xx (N=35)
1MDL06-035-03 67 12.6 5.3
0.60 0.9
1MDL06-035-05 70 8.1 3.5
0.98 1.1
1MDL06-035-07 71 6.0 2.4
1.37 1.4
4.3
1MDL06-035-09 71 4.7 2.0
1.76 1.6
1MDL06-035-12 72 3.6 1.5
2.34 1.8
1MDL06-035-15 72 2.9 1.2
Performance data are given at 300K, vacuum
2.93 2.1
H2* h
mm mm
1.4 0.9
1.6 0.5
1.9 0.7
2.1 0.9
2.3 1.2
2.6 1.5
*Optional H2 value is specified for 0.5mm ceramics thickness
Technical Drawing
Options available
A. TEC Assembly:
Solder SnSb (Tmelt=230°C)
B. Ceramics:
1.Pure Al2O3(100%)
2.Alumina (Al2O3- 96%)
3.Aluminum Nitride (AlN)
100% Al2O3 used as standard
C. Ceramics Surface Options
1. Blank ceramics
2. Metallized:
2.1 Ni / Sn(Bi)
2.2 Gold plating
3. Metallized and pre-tinned:
3.1 Solder 94 (PbSnBi, Tmelt=94°C)
3.2 Solder 117 (In-Sn, Tmelt=117°C)
3.3 Solder 138 (Sn-Bi, Tmelt=138°C)
3.4 Solder 183 (Pb-Sn, Tmelt=183°C)
D. Thermistor (optional)
Can be mounted to cold side
ceramics edge. Calibration
is available.
E. Terminal wires
1. Pre-tinned Copper
2. Insulated Wires
3. Insulated Color Coded
4. Wire Bonding Pads
53 Leninskij prosp. Moscow 119991 Russia, ph: [phone], fax: [phone], web: www.rmtltd.ru
Copyright 2008. RMT Ltd. The design and specifications of products can be changed by RMT Ltd without notice.
Page 1 of 5