1MD06035 Datasheet, PDF (1/8 Pages) RMT Ltd. – Blank ceramics (not metallized)

Thermoelectric Cooling Solutions
Performance Parameters
Type
ΔT
Q
Imax U
K
W
A
V
1MD06-035-xx (N=35)
1MD06-035-03
67
13.0 5.1
1MD06-035-05
70
8.4 3.2
1MD06-035-08
72
5.5
2.1
4.4
1MD06-035-10
72
4.5 1.7
1MD06-035-12
73
3.8 1.4
1MD06-035-15
73
3.0 1.1
Performance values are specified at 300K, vacuum
AC R H
Ohm mm
0.62 0.9
1.01 1.1
1.58 1.4
1.96 1.6
2.35 1.8
2.92 2.1
Dimensions
1MD06-035-XX
Manufacturing options
A. TEC Assembly:
1. Solder Sn-Sb, Tmelt=230°C
(default assembly solder)
2. Solder Au-Sn, Tmelt=280°C
! ^{(optional solution, by request)}
B. Ceramics:
1. Pure Al2O3(100%) - default
2. Alumina (Al2O3- 96%)
!!^{3. Aluminium Nitride (AlN)}
C. Ceramics Surface Options:
1. Blank ceramics (not metallized)
2. Metallized (Au plating)
3. Metallized and pre-tinned with:
3.1. In-Sn, Tmelt =117°C
3.2. Sn-Bi, Tmelt = 138°C
3.3. In-Ag, Tmelt = 143°C
3.4. Pure In, Tmelt = 157°C
3.5. Pb-Sn, Tmelt =183°C
3.6. Optional type (can be
!
! ^{specified by Customer)}
D. Thermistor (optional)
Can be mounted to cold side
ceramics edge. Calibration is
available by request.
E. Terminal contacts
1. Blank, tinned Copper
2. Insulated Wires
3. Insulated, color coded
46 Warshavskoe shosse. Moscow 115230 Russia, ph: [phone], fax: [phone], web: www.rmtltd.ru
Copyright 2014. RMT Ltd. The design and specifications of products can be changed by RMT Ltd without notice.
Page 1# of 8#