1MD04005 Datasheet, PDF (1/5 Pages) RMT Ltd. – 1MD03 thermoelectric coolers are specially developed for cooled TOSA applications with strict operating current limits and low power consumption.

Thermoelectric Module Datasheet
RMT Ltd
Performance Parameters
1MD04-005-XX
Type
ΔTmax Q_max I_max U_max AC R H H2* h
K W A V Ohm mm mm mm
1MD04-005-xx (N=5)
1MD04-005-03
68 0.9 2.3
0.19 0.9 1.4 0.3
1MD04-005-05
71 0.5 1.5
0.32 1.1 1.6 0.5
1MD04-005-08
1MD04-005-10
72 0.3 1.0
0.51 1.4 1.9 0.8
0.6
72 0.3 0.8
0.64 1.6 2.1 1.0
1MD04-005-12
72 0.2 0.7
0.76 1.8 2.3 1.2
1MD04-005-15
72 0.2 0.5
Performance data are given at 300K, vacuum
0.95
2.1 2.6 1.5
*Optional H2 value is specified for 0.5mm ceramics thickness
Technical Drawing
Options available
A. TEC Assembly:
Solder SnSb (Tmelt=230°C)
B. Ceramics:
1.Pure Al2O3(100%)
2.Alumina (Al2O3- 96%)
3.Aluminum Nitride (AlN)
100% Al2O3 used as standard
C. Ceramics Surface Options
1. Blank ceramics
2. Metallized:
2.1 Ni / Sn(Bi)
2.2 Gold plating
3. Metallized and pre-tinned:
3.1 Solder 94 (PbSnBi, Tmelt=94°C)
3.2 Solder 117 (In-Sn, Tmelt=117°C)
3.3 Solder 138 (Sn-Bi, Tmelt=138°C)
3.4 Solder 183 (Pb-Sn, Tmelt=183°C)
D. Thermistor (optional)
Can be mounted to cold side
ceramics edge. Calibration
is available.
E. Terminal wires
1. Pre-tinned Copper
2. Insulated Wires
3. Insulated Color Coded
4. Wire Bonding Pads
53 Leninskij prosp. Moscow 119991 Russia, ph: [phone], fax: [phone], web: www.rmtltd.ru
Copyright 2008. RMT Ltd. The design and specifications of products can be changed by RMT Ltd without notice.
Page 1 of 5