1MD02040_TEG Datasheet, PDF (1/8 Pages) RMT Ltd. – Thermoelectric Power Generating Solutions

Thermoelectric Power Generating Solutions
Performance Parameters
1MD02-040-xxTEG
TEG PERFORMANCE AT SPECIFIED HOT SIDE TEMPERATURE
Optimum Power
Output
Pout, W
Optimum Voltage
Uout, V
Open Circuit Voltage
Uoc, V
Resistance
ACR, Ohm
H
mm
85ºC 55ºC 35ºC 85ºC 55ºC 35ºC 85ºC 55ºC 35ºC 85ºC 55ºC 35ºC
1MD02-040-03TEG 0.04 0.01 0.001 0.58 0.28 0.08 1.01 0.48 0.14 6.92 6.43 6.11 0.8
Performance values are specified for TEG cold side at +27ºC, Dry Air. Optimum Power and Voltage are given at Optimum Load Resistance
Dimensions
Dimensions are in mm
Manufacturing options
A. TEG Assembly:
C. Ceramics Surface Options:
D. Thermistors (optional)
1. Solder Sn-Sb, Tmelt=230°C
1. Blank ceramics - default
Can be mounted to ceramics
(default assembly solder)
2. Metallized (Au plating)
edge. Calibration is available
2. Solder Au-Sn, Tmelt=280°C
! ^{(optional solution, by request)}
3. Metallized and pre-tinned with:
3.1. In-Sn, Tmelt =117°C
3.2. Sn-Bi, Tmelt = 138°C
! ^{by request.}
E. Terminal contacts
B. TEG Ceramics:
3.3. In-Ag, Tmelt = 143°C
1. Blank, tinned Copper Wires
1. Al2O3(100%) - default
3.4. In, Tmelt = 157°C
2. Insulated Wires
!!^{2. AlN - by request}
3.5. Pb-Sn, Tmelt =183°C
3.6. Optional type (can be
specified by Customer)
3. Insulated, color coded
4. WB pads or Posts (default)
5. Flip-Chip (optional)
! _! !! ^! _{46 Warshavskoe shosse. Moscow 115230 Russia, ph: [phone], fax: [phone], web: www.rmtltd.ru}
Copyright 2014. RMT Ltd. The design and specifications of products can be changed by RMT Ltd without notice.
Page 1# of 8#