S1-0R039J8 Datasheet, PDF (1/2 Pages) Riedon Powertron – Surface Mount Wirewound Resistors

S & SL Series
Surface Mount Wirewound Resistors
• Resistance: 0.005 to 50kOhms
• High Power: to 4 Watts
• Tolerance to ±0.05%
• High Temperature Rating up to 275°C
• Low Temperature Coefficient to ±20ppm/°C
• Superior Surge Handling Capability
• Non-Inductive Windings are Available (Type SN)
• Flame Resistant UL 94V-0
SPECIFICATIONS
Type
S-1
S-2
S-4
S-3
S-5
SL-2
SL-4
Power Rating
Watts @ 70°C
0.5
1
2
3
4
1
2
Resistance
Range ( Ω )
Non-Inductive Winding
Resistance Range ( Ω )¹
Maximum
Working Voltage
0.01 to 400
0.1 to 200
0.005 to 3k
0.1 to 1.5K
0.01 to 15k
0.01 to 25k
0.01 to 50k
0.1 to 7.5K
0.1 to 12.5K
0.1 to 25K
P*R
0.005 to 0.05
N/A
0.005 to 0.07
N/A
1 _{Below 0.1Ω the inductance of a single winding, or the metal element (SL) is negligible}
Specification
Tolerances
Temperature Coefficient
Temperature Range
Dielectric Strength
Insulation Resistance
Terminal Finish
Reel / Tape Width (mm)
Value
S: Above 100Ω, ±0.05% to ±5%
S: Above 1Ω, ±0.1% to ±5%
S: Below 1Ω, ±1% to ±5%
SL: ±1% to ±5%
S: >10Ω : ±20ppm/°C
S: 1Ω to10Ω : ±50ppm/°C
S: <1Ω : Call Factory
SL: ±200ppm/°C, For Lower Call Factory
-55°C to +275°C
S: 1000 VAC
SL: 500 VAC
>1000 MOhms / Dry
100% Electroless Tin over Copper
S-1: 12 / S-2: 16 / S-3: 24 / S-4: 24 / S-5: 32 / SL-2: 16 / SL-4: 24
Environmental Performance
(MIL-STD 202)
Dielectric
Load Life
Storage
Moisture Resistance
Thermal Shock
5X Overload ( 5s )
Shock
Solder Heat Resistance ( 260C, 10s )
∆R MAX
±0.5% + 0.05Ω
±1% + 0.05Ω
±0.5% + 0.05Ω
±1% + 0.05Ω
±0.5% + 0.05Ω
±0.5% + 0.05Ω
±0.5% + 0.05Ω
±0.5% + 0.05Ω
Power Derating Curve
120
100
80
60
40
20
0
0
50
100
150
200
250
300
350
Ambient Temperature (°C)
Riedon Inc.
8/17
300 Cypress Avenue
Alhambra CA 91801
www.riedon.com
[phone]
[phone]