PFC10-62RF1 Datasheet, PDF (1/3 Pages) Riedon Powertron – Thick Film Power SMD Resistors

PFC Series
Thick Film Power SMD Resistors
• D-PAK Foot Pattern
• Very Low Profile
• Resistances from 0.1 Ohm to 51kOhms
• Power Rating to 25 Watts
• Resistance Tolerances to ±1%
• TCR to ±100ppm/°C
• Isolated Back Plate
SPECIFICATIONS
Type
Power Rating with heatsink
Short Time Overload
Thermal Resistance Rthj-c
Resistance Range
Tolerances (others upon request)
Temperature Coefficient
Operating Temperature
Max Operating Voltage
Capacitance
Inductance
Withstanding Voltage
Insulation Resistance
Resistor Material
Test Conditions
Load Life
Humidity
Temperature Cycle
Solder Heat
Lead Solderability
Vibration
±1%
±1%
±0.25%
±0.1%
Over 95% of surface
±0.25%
PFC10
25W ( 2.5W on Simple Foot Print )
35 W
3.6 K/W
0.1 - 51K Ohms E24+
(includes 2.5, 4.0, 5.0, 8.0, and 16)
1% / 5%
100 ppm/K
-55°C to 155°C
P*R
1.44 pF
15 nH
1500 VAC
Over 1,000 Megohm
Thick Film
Results
90 min ON, 30 min OFF, 1000 hrs @ 25C
90-95% RH, 0.1W, 1000 hrs @ 40C
-55C for 30 min, +155C for 30 min, 5 cycles
350C ±5C for 3 seconds
230 ±5C for 3 seconds
IEC60068-2-6
Ordering Information
Part Description: Part Type - Resistance - Tolerance
PFC10 10 Ohms 1%
Note: PFC10 can operate 35W rating with back solder pad temperature of 25°C
Riedon Inc.
300 Cypress Avenue
Alhambra CA 91801
www.riedon.com
[phone]
[phone]
5/16