R1190 Datasheet, PDF (5/27 Pages) RICOH electronics devices division – 1A VOLTAGE REGULATOR (Operating Voltage up to 16V)

R1190x
ELECTRICAL CHARACTERISTICS
VIN=VCE=Set VOUT+2.0V, CIN=COUT=4.7µF, IOUT=1mA, unless otherwise noted.
The specification in
is checked and guaranteed by design engineering at −40°C ≤ Topt ≤ 85°C.
• R1190x
Topt=25°C
Symbol
Item
Conditions
Min. Typ. Max. Unit
VOUT
∆VOUT/∆IOUT
VDIF
ISS
Istandby
∆VOUT/∆VIN
RR
VIN
∆VOUT
/∆Topt
ILIM
ISC
VCEH
VCEL
TTSD
TTSR
Output Voltage
Load Regulation
Dropout Voltage
Supply Current
Standby Current
(CE Off State)
Line Regulation
Ripple Rejection
Input Voltage
Output Voltage
Temperature Coefficient
Output Current
Short Current Limit
CE Input Voltage "H"
CE Input Voltage "L"
Thermal Shutdown
Temperature
Thermal Shutdown
Released Temperature
IOUT=1mA
Topt=25°C
×0.985
−40°C ≤ Topt ≤ 85°C ×0.973
Refer to the following table
Refer to the following table
IOUT=0mA
150
VIN=16V
0.1
VCE=0V
VOUT+0.5V (Min.3.5V) ≤ VIN ≤ 16V
IOUT=1mA
0.02
f=1kHz, IOUT=100mA
60
3.5
×1.015
×1.027
220
1.0
0.10
16
IOUT=1mA, −40°C ≤ Topt ≤ 85°C
±100
VOUT=0V
Refer to the following table
300
1.6
VIN
0
0.6
Junction Temperature
150
Junction Temperature
130
V
µA
µA
%/V
dB
V
ppm
/°C
mA
V
V
°C
°C
RLOW
Low Output Nch Tr.
ON Resistance
(of D version)
VIN=5.0V
VCE=0V
VOUT=0.3V
150
Ω
All of units are tested and specified under pulse load conditions such that Tj≈Topt=25°C except for Ripple
Rejection, Output Voltage Temperature Coefficient, Thermal Shutdown, Load Regulation at 600mA (2.0V ≤ VOUT
< 2.5V) and at 700mA (2.5V≤ VOUT < 3.3V) and at 1000mA (3.3V ≤ VOUT ≤ 12.0V), Dropout Voltage at 600mA
(2.0V ≤ VOUT < 2.5V) and at 700mA (2.5V ≤ VOUT < 3.3V) and at 1000mA (3.3V ≤ VOUT ≤ 12.0V).
5