|
R1110N Datasheet, PDF (5/23 Pages) RICOH electronics devices division – LOW NOISE 150mA L.D.O REGULATOR | |||
|
◁ |
R1110N
BLOCK DIAGRAM
R1110NÃÃ1A
VDD 1
CE 3
--
+
Vref
Current Limit
5 VOUT VDD 1
2 GND CE 3
R1110NÃÃ1B
--
+
Vref
Current Limit
5 VOUT
2 GND
SELECTION GUIDE
The output voltage, the active type, the packing type and the taping type for the ICs can be selected at the user's request.
The selection can be made by designating the part number as shown below:
R1110N ÃÃ1 ÃâÃÃâPart Number
â ââ
a bc
Code
a
b
c
Contents
Setting Output Voltage ( VOUT) :
Stepwise setting with a step of 0.1V in the range of 2.0V to 6.0V is possible.
Designation of Chip enable Active Type :
A : âLâ active type
B : âHâ active type
Designation of Taping Type :
Ex. TR, TL (refer to Taping Specifications, TR type is prescribed as a standard.)
2
|
▷ |