RV5VH Datasheet, PDF (44/47 Pages) RICOH electronics devices division – DC/DC CONVERTER CONTROLLER

TYPICAL APPLICATION 3
Output DC/DC 1
R5
C5 ^PMOS
R6
L1
SBD1
NMOS
C1
CSW
FB1
VDD
EXT1
RV5VH3××
VIN
DOUT
FB2
EXT2
GND
R3
R1
PNP Tr.
R4
C4
L2
SBD3
R2
C3
SBD2
Output DC/DC 2
C2
R1 : 820kΩ, R2 : 820kΩ, R3 : 100kΩ, R4 : 1kΩ, R5 : 750kΩ (AdjustabIe)
R6 : 100kΩ
L1 : 68µH, L2 : 27µH
C1 : 22µF, C2 : 22µF, C3 : 1000pF, C4 : 2200pF, C5 : 1000pF
PMOS : 2SJ238, NMOS : 2SK1470, PNPTr. : 2SB1120F
Operation
The VDD voltage can be supplied from another source than battery output and a reference voltage for DC/DC2 is
supplied by the output of DC/DC1.
The PMOS transistor can operate as a switch when the CSW is “L”.
• Step up DC/DC converter : DC/DC1
The oscillator can operate when CSW is “H”. When the CSW is “L” the EXT1 outputs GND.
The output voltage can be adjusted by R5 and R6 with FB1 of two volt.
• Invering DC/DC converter : DC/DC2
The oscillator can operate when CSW is “H”. When the CSW is “L” the EXT2 outputs VDD.
The output voltage can be adjusted by R1 and R2 with FB2 of zero volt.
• VoItage Detector
VDD pin can be monitored. This could be operated all the time by VDD.
The DOUT pin outputs “L” when low voltage is detected with Nch open-drain output.
43