R1161N081A Datasheet, PDF (37/44 Pages) RICOH electronics devices division – 3-MODE 300mA LDO REGULATOR

PACKAGE INFORMATION
PE-SOT-23-5-0510
POWER DISSIPATION (SOT-23-5)
This specification is at mounted on board. Power Dissipation (PD) depends on conditions of mounting on board.
This specification is based on the measurement at the condition below:
(Power Dissipation (SOT-23-5) is substitution of SOT-23-6.)
Measurement Conditions
Environment
Board Material
Board Dimensions
Copper Ratio
Through-hole
Standard Land Pattern
Mounting on Board (Wind velocity=0m/s)
Glass cloth epoxy plactic (Double sided)
40mm u 40mm u 1.6mm
Top side : Approx. 50% , Back side : Approx. 50%
I0.5mm u 44pcs
Measurement Result
Power Dissipation
Thermal Resistance
Standard Land Pattern
420mW
Tja (12525qC)/0.42W 263qC/W
(Topt=25qC,Tjmax=125qC)
Free Air
250mW
400qC/W
600
40
500
On Board
420
400
300 ₂₅₀
Free Air
200
100
0
0
25
50
75 85 100 125 150
Ambient Temperature (°C)
Power Dissipation
RECOMMENDED LAND PATTERN
0.7 MAX.
Measurement Board Pattern
IC Mount Area Unit : mm
1.0
2.4
0.95 0.95
1.9
(Unit: mm)