R1172 Datasheet, PDF (3/25 Pages) RICOH electronics devices division – SUPER LOW ON RESISTANCE / LOW VOLTAGE 1A LDO

PIN CONFIGURATIONS
z SOT-23-5
z SOT-89-5
5
4
5
4
(mark side)
R1172x
z HSON-6
Top View
654
Bottom View
456
∗
∗
∗
z HSOP-6J
654
123
1
2
3
123
321
1 23
PIN DESCRIPTIONS
• SOT-23-5
Pin No.
1
2
3
4
5
Symbol
VOUT
GND
VDD
NC
CE or CE
Description
Voltage Regulator Output Pin
Ground Pin
Input Pin
No Connection
Chip Enable Pin
• SOT-89-5
Pin No.
1
2
3
4
5
Symbol
CE or CE
GND
NC
VDD
VOUT
Description
Chip Enable Pin
Ground Pin
No Connection
Input Pin
Voltage Regulator Output Pin
• HSON-6
Pin No.
Symbol
Description
1
VOUT*¹
Voltage Regulator Output Pin
2
VOUT*¹
Voltage Regulator Output Pin
3
CE or CE
Chip Enable Pin
4
GND
Ground Pin
5
VDD*¹
Input Pin
6
VDD*¹
Input Pin
∗) Tab and tab suspension leads in the parts are GND level.
(They are connected to the reverse side of the IC.)
The tab is better to be connected to the GND, but leaving it open is also acceptable.
The tab suspension leads should be open and do not connect to other wires or land patterns.
∗1) The VOUT pin and VDD pin must be wired each other when it is mounted on board.
3