R1160N Datasheet, PDF (26/27 Pages) RICOH electronics devices division – SOT23-5 3-MODE 200mA LDO REGULATOR

s TECHNICAL NOTES
When using these ICs, consider the following points:
In these ICs, phase compensation is made for securing stable operation even if the load current is varied. For this purpose, be
sure to use a capacitor COUT with good frequency characteristics and ESR (Equivalent Series Resistance) of which is in the
range described as follows:
The relations between IOUT (Output Current) and ESR of Output Capacitor are shown below. The conditions when the white
noise level is under 40µV(Avg.) are marked as the hatched area in the graph.
<Test conditions>
(1) Frequency band: 10Hz to 2MHz
(2) Temperature: 25°C
R1160N261X ECO=H
VIN=3.6V, CIN=Ceramic 1.0µF, COUT= Ceramic 1.0µF
100
R1160N261X ECO=L
VIN=3.6V, CIN=Ceramic 1.0µF, COUT= Ceramic 1.0µF
100
10
10
1
1
0.1
0.1
0.01
0
20 40 60 80 100 120 140 160 180 200
Load Current Iout1(mA)
R1160N261X ECO=H
VIN=3.6V, CIN=Ceramic 1.0µF, COUT= Ceramic 2.2µF
100
0.01
0
20 40 60 80 100 120 140 160 180 200
Load Current Iout1(mA)
R1160N261X ECO=L
VIN=3.6V, CIN=Ceramic 1.0µF, COUT= Ceramic 2.2µF
100
10
10
1
1
0.1
0.1
0.01
0
20 40 60 80 100 120 140 160 180 200
Load Current Iout1(mA)
0.01
0
20 40 60 80 100 120 140 160 180 200
Load Current Iout1(mA)
Rev. 1.10
- 26 -