RN5RT Datasheet, PDF (17/17 Pages) RICOH electronics devices division – LOW DROPOUT VOLTAGE REGULATOR

RN5RT
TYPICAL APPLICATION
VIN C1
2 VDD
VOUT 3
IOUT
5 _CE
C2
GND
1
In the RN5RT Series, a constant voltage can be obtained without using Capacitor C1 and C2. However, when the
wire connected to VIN is long, use Capacitor C1. Transient noise of output voltage occurred due to load deviation can
be reduced by using Capacitor C2.
Insert Capacitors C1 and C2 with the capacitance of 0.1µF to 2.0µF between Input/Output Pins and GND Pin
with minimum wiring.
16