|
RP171 Datasheet, PDF (1/29 Pages) RICOH electronics devices division – Supply Current Typ. 23uA | |||
|
RP171x SERIES
150mA 10V INPUT LDO REGULATOR
NO.EA-245-160324
OUTLINE
The RP171x Series are CMOS-based LDO regulators featuring 150mA output current. Because of the 10V
maximum input voltage, RP171x can be used in 2 cell lithium-ion battery powered portable appliances and besides
a portable equipment. The supply current is Typ. 23ïA though an excellent response characteristics.
The output voltage range from 1.2V is possible. The output voltage accuracy and temperature-drift coefficient
of output voltage of the RP171x Series are excellent.
RP171x has a fold-back protection circuit and a thermal shutdown circuit. Moreover, a standby mode with ultra
low supply current can be realized with the chip enable function.
SC-88A and SOT-23-5 with high power dissipation packages are available.
FEATURES
ï· Supply Current .............................................................Typ. 23ïA
ï· Standby Mode ..............................................................Typ. 0.1ïA
ï· Dropout Voltage............................................................Typ. 0.20V (IOUTï½100mA, VOUTï½3.0V)
Typ. 0.40V (IOUTï½150mA, VOUTï½2.8V)
ï· Ripple Rejection ...........................................................Typ. 70dB (fï½1kHz)
ï· Temperature-Drift Coefficient of Output Voltage ..........Typ. ï±80ppm/ï°C
ï· Line Regulation ............................................................Typ. 0.02%/V
ï· Output Voltage Accuracy..............................................ï±1.0%
ï· Packages......................................................................SC-88A, SOT-23-5
ï· Input Voltage Range.....................................................2.6V to 10.0V
ï· Output Voltage Range..................................................1.2V to 6.0V (0.1V steps)
(For other voltages, please refer to MARK INFORMATIONS.)
ï· Built-in Fold Back Protection Circuit.............................Typ. 40mA (Current at short mode)
ï· Built-in Thermal Shutdown Circuit................................Shutdown Temperature at 165ï°C
ï· Built-in Constant Slope Circuit (Soft-start Function)
ï· Ceramic capacitors are recommended to be used with this IC .... 1.0ïF or more
APPLICATIONS
ï· Power source for portable communication equipment.
ï· Power source for electrical appliances such as cameras, VCRs and camcorders.
ï· Power source for battery-powered equipment.
ï· Power source for home appliances.
1
|
▷ |