RP150 Datasheet, PDF (1/26 Pages) –

RP150K SERIES
LOW NOISE Dual 300mA LDO
NO. EA-131-111020
OUTLINE
The RP150K Series are CMOS-based dual voltage regulator ICs with high output voltage accuracy, low
supply current, low dropout, and high ripple rejection. Each of these voltage regulator ICs consists of a voltage
reference unit, an error amplifier, resistors for setting Output Voltage, a current limit circuit, and a chip enable
circuit.
These ICs perform with low dropout voltage due to built-in transistor with low ON resistance, and a chip
enable function prolongs the battery life of each system. The line transient response and load transient
response of the RP150 Series are excellent, thus these ICs are very suitable for the power supply for hand-held
communication equipment.
The output voltage of these ICs is internally fixed with high accuracy (1%). Since the packages for these ICs
are DFN(PLP)2020-8 package, 2ch LDO regulators are included in each packages, high density mounting of the
ICs on boards is possible.
FEATURES
• Supply Current ..................................................................... Typ. 24μA×2 (VR1&VR2)
• Standby Current ................................................................... Typ. 0.1μA×2 (VR1&VR2)
• Dropout Voltage.................................................................... Typ. 0.21V (IOUT=300mA, VOUT=2.8V)
Typ. 0.24V (IOUT=300mA, VOUT=2.5V)
• Ripple Rejection ................................................................... Typ. 80dB (f=1kHz)
• Temperature-Drift Coefficient of Output Voltage .................. Typ. ±30ppm/°C
• Line Regulation .................................................................... Typ. 0.02%/V
• Output Voltage Accuracy......................................................±1.0%
• Input Voltage Range............................................................. 2.5V to 5.25V
• Output Voltage Range.......................................................... 1.5V to 3.3V (0.1V steps)
(For details, please refer to MARK INFORMATIONS.)
• Package .............................................................................. DFN(PLP)2020-8
• Built-in Fold Back Protection Circuit..................................... Typ. 50mA
• Built-in Auto Discharge Function .......................................... B Version
• Ceramic capacitors are recommended to be used with this IC .... CIN=COUT=1.0μF or more
APPLICATIONS
• Power source for portable communication equipment.
• Power source for electrical appliances such as cameras, VCRs and camcorders.
• Power source for battery-powered equipment.
1