|
RP106_17 Datasheet, PDF (1/34 Pages) RICOH electronics devices division – Supply Current Typ. 48uA | |||
|
RP106N (SOT-23-5) is the non-promotion product. As of March in 2015.
RP106x SERIES
0.8%ACCURACY 0.7V OUTPUT 400mA LDO REGULATOR
NO.EA-180-131017
OUTLINE
The RP106x Series are low voltage 400mA voltage regulator. These ICs had been further improved of low-
voltage capability compared with previous low-voltage product.
The input voltage is as low as Min. 1.0V and the output voltage can be set from 0.7V. The output voltage
accuracy has been improved to ±0.8% and due to a built-in transistor with low on-resistance of 0.55⦠(at
VOUT=1.5V).
Each of these ICs consists of a voltage reference unit, an error amplifier, a resistor-net for voltage setting, and
a current limit circuits for over-current for the destruction prevention by the over-current.
The CE pin can switch the regulator to standby mode. In addition to SOT-23-5 and SC-88A packages, a
0.69mm square WLCSP-4-P5 package and a 1.2mm square DFN(PLP)1212-6 are also available.
FEATURES
⢠Supply Current ......................................................Typ. 48µA
⢠Standby Current ....................................................Typ. 0.1µA
⢠Ripple Rejection ....................................................Typ. 60dB (f=10kHz)
⢠Input Voltage Range .............................................1.0V to 3.6V
⢠Output Voltage Range...........................................0.7V to 1.8V (0.1V steps)
(For other voltages, please refer to MARK INFORMATIONS.)
⢠Output Voltage Accuracy.......................................±0.8% (VOUTâ¥1.0V, Topt=25°C)
⢠Temperature-Drift Coefficient of Output Voltage ...Typ. ±60ppm/°C
⢠Dropout Voltage ....................................................Typ. 0.22V (VOUT=1.5V)
⢠Line Regulation .....................................................Typ. 0.10%/V
⢠Packages ..............................................................WLCSP-4-P5, DFN(PLP)1212-6, SC-88A, SOT-23-5
⢠Built-in Fold Back Protection Circuit .....................Typ. 110mA (Current at short mode)
⢠Built-in Constant Slope Circuit
⢠Ceramic capacitors are recommended to be used with this IC .....1.0µF or more
APPLICATIONS
⢠Power source for portable communication equipment.
⢠Power source for electrical appliances such as cameras, VCRs and camcorders.
⢠Power source for battery-powered equipment.
1
|
▷ |