R5534V Datasheet, PDF (1/7 Pages) RICOH electronics devices division – PCMCIA Power Controller

R5534V
May. 2005
PCMCIA Power Controller
sDESCRIPTION
The R5534V switches between the three VCC voltages (0V/3.3V/5.0V) and the VPP voltages (off/0V/3.3V/5.0V).
The R5534V has two sets of VCC output and VPP output each, therefore it fits dual slot models. If VCC pin or VPP pin
may be clamped to the GND, short current limit works at 1A(Min.) for VCC and 0.15A(Min.) for VPP.
The R5534V is suitable for standard PCMCIA power controllers.
sFEATURES
z Low on resistance P-channel MOSFET Switch
z Dual Slot Power Supply Control
z Over- Current Limit Protection
z Thermal Shutdown Protection
z Low Consumption Current
z Break-Before-Make Switching
z SSOP-20 pin Package
sAPPLICATIONS
Dual Slot PC card Power Supply Pin Voltage Switch
Card-bus Slot Power Supply Control
PC Card Reader/Writer
s PIN CONFIGURATION
AVCC5_EN 1
AV^CC3_EN 2
AEN1 3
AEN0 4
TST
5
VCC5IN
6
AV^CCOUT
7
AVCCOUT 8
AVPP _OUT
9
VCC3IN
10
20
BVCC5_EN
19
BVCC3_EN
18
BEN1
17
BEN0
16
GND
15
V^CC5IN
14
BVCC^OUT
13
BVCCOUT
12
BV^{PP OUT}
11
VCC3IN
*Note: Same name pins should be connected one another.
Connect TST pin to V_CC5IN pin.
Rev. 1.10
-1-