R5324 Datasheet, PDF (1/30 Pages) RICOH electronics devices division – Supply Current Typ. 90uA (VR1, VR2, VR3)

R5324D (SON-8) is the discontinued product. As of March in 2015.
R5324x SERIES
TRIPLE LDO
NO. EA-099-140530
OUTLINE
The R5324x Series are CMOS-based multi positive voltage regulator ICs with high output voltage accuracy,
low supply current, low noise, low dropout and high ripple rejection. The R5324x Series contain three voltage
regulators. Each of these voltage regulators in the R5324x Series consists of a voltage reference unit, an error
amplifier, resistors for setting output voltage, a short current limit circuit, a chip enable circuit, and so on.
The chip enable function contributes to prolong battery life. Further, regulators in the R5324x Series are with
low dropout voltage, excellent load transient response and line transient response, thus the R5324x series are
very suitable for the power supply for hand-held communication equipment.
Since the packages for these ICs are SON-8 and DFN(PLP)2527-10, high density mounting of the ICs on
boards is possible.
FEATURES
• Supply Current .................................................................. Typ. 90μA (VR1, VR2, VR3)
• Standby Current ................................................................ Typ. 0.1μA
• Output Current .................................................................. Min. 200mA (VR1), 150mA (VR2), 100mA (VR3)
• Dropout Voltage ................................................................ Typ. 0.23V (VR1) (IOUT=200mA, VOUT=2.8V)
Typ. 0.22V (VR2) (IOUT=150mA, VOUT=2.8V)
Typ. 0.15V (VR3) (IOUT=100mA, VOUT=2.8V)
• Ripple Rejection................................................................ Typ. 70dB (f=1kHz), Typ. 65dB (f=10kHz)
• Input Voltage Range ......................................................... 2.0V to 6.0V
• Output Voltage Range....................................................... 1.5V to 4.0V (0.1V steps)
(For details, please refer to MARK INFORMATIONS.)
• Output Voltage Accuracy................................................... ±2.0%
• Temperature-Drift Coefficient of Output Voltage ............... Typ. ±100ppm/°C
• Line Regulation ................................................................. Typ.0.02%/V
• Packages ......................................................................... DFN(PLP)2527-10, SON-8
• Built-in fold-back protection circuit .................................... Typ.50mA (VR1), Typ.40mA (VR2, VR3)
(Current at short mode)
• Ceramic capacitors are recommended to be used with this IC .....1.0μF or more
APPLICATIONS
• Power source for cellular phones and portable communication equipment.
• Power source for electrical appliances such as cameras, VCRs.
• Power source for battery-powered equipment.
1