R3115Z Datasheet, PDF (1/28 Pages) RICOH electronics devices division – LOW VOLTAGE DETECTOR WITH OUTPUT DELAY

R3115Z SERIES
LOW VOLTAGE DETECTOR WITH OUTPUT DELAY
NO.EA-098-061102
OUTLINE
The R3115Z Series are CMOS-based voltage detector ICs with high detector threshold accuracy and ultra-low
supply current, which can be operated at an extremely low voltage and is used for system reset as an example.
Each of these ICs consists of a voltage reference unit, a comparator, resistor net for detector threshold setting,
an output driver, a hysteresis circuit, and an output delay circuit. The detector threshold is fixed with high
accuracy internally and does not require any adjustment. Two output types, Nch open drain type and CMOS type
are available.
Since the package is WLCSP-4-P2, high density mounting on boards is possible.
FEATURES
• Built-in Output Delay Circuit............................................... Typ. 100ms with an external capacitor: 0.022µF
• Supply Current ....................................................................................Typ. 0.8µA (VDD=3.5V)
• Operating Voltage Range................................................................0.7 to 6.0V (Topt=25°C)
• Detector Threshold............................................................. 0.9V to 5.0V
• Accuracy Detector Threshold ........................................................±2.0%
• Temperature-Drift Coefficient of Detector Threshold ............Typ. ±100ppm/°C
• Two Output Types ..............................................................................Nch Open Drain and CMOS
• Package ............................................................................. WLCSP-4-P2
APPLICATIONS
• Micro controller and Logic Circuit Reset
• Battery Checker
• Window Comparator
• Wave Shaping Circuit
• Battery Back-up Circuit
• Power Failure Detector
1