R2043T-E2-F Datasheet, PDF (1/52 Pages) RICOH electronics devices division – 4-wire Serial Interface Real Time Clock IC

* R2043K (FFP12) is the discontinued product as of July, 2016.
R2043x Series
4-wire Serial Interface Real Time Clock IC
OUTLINE
NO.EA-224-160701
The R2043x is a CMOS real-time clock IC connected to the CPU by four signal lines, CE, SCLK, SI, SO, and
configured to perform serial transmission of time and calendar data to the CPU. The periodic interrupt circuit is
configured to generate interrupt signals with six selectable interrupts ranging from 0.5 seconds to 1 month. The 2
alarm interrupt circuits generate interrupt signals at preset times. As the oscillation circuit is driven under constant
voltage, fluctuation of the oscillator frequency due to supply voltage is small, and the time keeping current is small
(TYP. 0.45µA at 3V). The oscillation halt sensing circuit can be used to judge the validity of internal data in such
events as power-on; The supply voltage monitoring circuit is configured to record a drop in supply voltage below two
selectable supply voltage monitoring threshold settings. The 32.768kHz clock output function (N-channel open drain
output) is intended to output sub-clock pulses for the external microcomputer. The oscillation adjustment circuit is
intended to adjust time counts with high precision by correcting deviations in the oscillation frequency of the crystal
oscillator. Since the package for these ICs are TSSOP10G (4.0x2.9x1.0: R2043T) or QFN023023-16
(2.3x2.3x0.4:R2043L), high density mounting of ICs on boards is possible.
FEATURES
• Minimum Timekeeping supply voltage TYP:0.66 to 5.5v (Worst: 1.00V to 5.5v); VDD pin
• Low power consumption
0.45µA TYP at VDD=3V (1.00µA MAX.)
• Four signal lines (CE, SCLK, SI, and SO) required for connection to the CPU.
• Time counters (counting hours, minutes, and seconds) and calendar counters (counting years, months, days, and
weeks) (in BCD format)
• Interrupt circuit configured to generate interrupt signals (with interrupts ranging from 0.5 seconds to 1 month) to
the CPU and provided with an interrupt flag and an interrupt halt
• 2 alarm interrupt circuits (Alarm_W for week, hour, and minute alarm settings and Alarm_D for hour and minute
alarm settings)
• With Power-on flag to prove that the power supply starts from 0V
• 32-kHz clock output pin (N-channel open drain output)
• Supply voltage monitoring circuit with two supply voltage monitoring threshold settings
• Automatic identification of leap years up to the year 2099
• Selectable 12-hour and 24-hour mode settings
• High precision oscillation adjustment circuit
• Built-in oscillation stabilization capacitors (CG and CD)
• Package TSSOP10G (4.0mm x 2.9mm x 1.0mm: R2043T)
• FFP12 (2.0mm x 2.0mm x 1.0mm: R2043K)
• QFN023023-16(2.3mm x 2.3mm x 0.4mm: R2043L)
• CMOS process
1