R1160 Datasheet, PDF (1/31 Pages) RICOH electronics devices division – 3-MODE 200mA LDO REGULATOR

R1160D (SON-6) is the discontinued product. As of March in 2015.
R1160x SERIES
3-MODE 200mA LDO REGULATOR
NO.EA-083-140530
OUTLINE
The R1160x Series consist of CMOS-based voltage regulator ICs with high output voltage accuracy, low
supply current, and low ON-resistance. Each of these voltage regulator ICs consists of a voltage reference unit,
an error amplifier, resistors for setting Output Voltage, a current limit circuit, and a chip enable circuit.
These ICs perform with low dropout voltage and a chip enable function. To prevent the destruction by over
current, current limit circuit is included. The R1160x Series have 3-mode. One is standby mode with CE or
standby control pin. Other two modes are realized with ECO pin™. Fast Transient Mode (FT mode) and Low
Power Mode (LP mode) are alternative with ECO pin™. Consumption current is reduced to 1/10 at Low Power
Mode compared with Fast Transient Mode. Output voltage is maintained between FT mode and LP mode.
The output voltage of these ICs is internally fixed with high accuracy. Since the packages for these ICs are
SOT-23-5 and SON-6 packages, high density mounting of the ICs on boards is possible.
FEATURES
• Supply Current (Low Power Mode)............................... Typ. 3.5μA (VOUT ≤ 1.5V)
• Supply Current (Fast Transient Mode).......................... Typ. 40μA
• Supply Current (Standby Mode).................................... Typ. 0.1μA
• Dropout Voltage ............................................................ Typ. 0.14V (IOUT=200mA, VOUT=2.8V)
• Ripple Rejection............................................................ Typ. 70dB (f=1kHz, FT Mode)
• Temperature-Drift Coefficient of Output Voltage ........... Typ. ±100ppm/°C
• Line Regulation ............................................................. Typ. 0.05%/V
• Output Voltage Accuracy............................................... ±2.0% (±3.0% at LP Mode)
• Output Voltage Range................................................... 0.8V to 3.3V (0.1V steps)
(For other voltages, please refer to MARK INFORMATIONS.)
• Input Voltage Range ..................................................... 1.4V to 6.0V
• Built-in Fold Back Protection Circuit ............................. Typ. 50mA (Current at short mode)
• Packages ..................................................................... SOT-23-5, SON-6
APPLICATIONS
• Precision Voltage References.
• Power source for electrical appliances such as cameras, VCRs and hand-held communication equipment.
• Power source for battery-powered equipment.
1