|
R1124N151A Datasheet, PDF (1/23 Pages) RICOH electronics devices division – LOW NOISE 150mA LDO REGULATOR | |||
|
R1124N SERIES
LOW NOISE 150mA LDO REGULATOR
NO.EA-095-0512
OUTLINE
The R1124N Series are CMOS-based voltage regulator ICs with high output voltage accuracy, extremely low
supply current, low ON-resistance, and high ripple rejection. Each of these ICs consists of a voltage reference
unit, an error amplifier, resistor-net for voltage setting, a current limit circuit, and a chip enable circuit.
These ICs perform with low dropout voltage and a chip enable function. The line transient response and load
transient response of the R1124N Series are excellent, thus these ICs are very suitable for the power supply for
hand-held communication equipment.
The output voltage of these ICs is fixed with high accuracy. Since the package for these ICs is SOT-23-5, high
density mounting of the ICs on boards is possible.
FEATURES
⢠Low Supply Current ............................................................. Typ. 75µA
⢠Standby Mode ...................................................................... Typ. 0.1µA
⢠Low Dropout Voltage............................................................ Typ. 0.22V (IOUT=150mA 3.0V Output type)
⢠High Ripple Rejection .......................................................... Typ. 70dB (f=1kHz 3.0V Output type)
............................................................................................. Typ. 60dB (f=10kHz)
⢠Low Temperature-Drift Coefficient of Output Voltage........... Typ. ±100ppm/°C
⢠Excellent Line Regulation .................................................... Typ. 0.02%/V
⢠High Output Voltage Accuracy ............................................. ±2.0%
⢠Small Packages ................................................................. SOT-23-5
⢠Output Voltage ..................................................................... Stepwise setting with a step of 0.1V in
the range of 1.5V to 4.0V is possible
⢠Built-in Fold Back Protection Circuit .................................... Typ. 40mA (Current at short mode)
⢠Ceramic capacitors are recommended to be used with this IC ... CIN=COUT=1µF (VOUT<2.5V)
CIN=1µF, COUT=0.47µF (VOUT >= 2.5V)
APPLICATIONS
⢠Power source for portable communication equipment.
⢠Power source for electrical appliances such as cameras, VCRs and camcorders.
⢠Power source for battery-powered equipment.
1
|
▷ |