RT9907_14 Datasheet, PDF (1/19 Pages) Richtek Technology Corporation – 3 Channel DC/DC Converters IC with High-Efficiency Step-Up and Step-Down

®
RT9907
3 Channel DC/DC Converters IC with High-Efficiency Step-Up
and Step-Down
General Description
The RT9907 is a three channel power-supply solution for
digital still cameras and other battery-powered devices. It
integrates an asynchronous step-up and two synchronous
step-down DC-DC converters. The RT9907 is targeted for
applications that use two AA cells or a single lithium-ion
battery.
The three DC-DC converters (CH1, CH2, CH3) accept input
voltage from 1.5V to 5.5V. Each DC-DC converter has
better transient response and excellent stability by
providing current-mode control and external compensation
network. With built-in Internal MOSFET and up to 1.4MHz
operating frequency, the RT9907 allows minimum BOM
cost and PCB area.
The step-down DC-DC converters (CH2, CH3) can regulate
output voltage as low as 0.8V. Three operational modes
are available: PWM, PSM, Low-Dropout modes. At PWM
mode, Internal synchronous rectifier with low R_DS(ON)
dramatically reduces conduction loss and achieve 94%
efficiency. It enters Low-Dropout mode when normal PWM
cannot provide regulated output voltage by continuously
turning on the upper P-MOSFET. No external Schottky
diode is required in practical application.
Each DC-DC converter has independent enable input and
soft-start function allowing versatile power sequence
combination. Complete protection functions are
implemented such as short circuit, over-voltage protection.
The RT9907 is available in small VQFN-24L 4x4 package.
Features
 1.5V to 5.5V Battery Input Voltage Range
 Main step-up DC-DC Converter
 1.5V to 5.5V Adjustable Output Voltage
 Up to 90% Efficiency
 2.6A, 0.3Ω Internal Power Switch
 Two Step-Down DC-DC Converters
 0.8V to 5.5V Adjustable Output Voltage
 94% Efficiency
 100% Duty Cycle
 Up to 1.4MHz Switching Frequency
 1uA Supply Current in Shutdown Mode
 Programmable Soft Start Function
 Independent Enable Pin (CH1, CH2, CH3)
 External Compensation Network (CH1, CH2, CH3)
 Short Circuit Protection (CH1, CH2, CH3)
 Over Voltage Protection (CH2)
 24-Lead VQFN Package
 RoHS Compliant and 100% Lead (Pb)-Free
Applications
 Digital Still Camera
 PDAs
 Portable Device
Pin Configurations
(TOP VIEW)
Ordering Information
RT9907
Package Type
QV : VQFN-24L 4x4 (V-Type)
(Exposed Pad-Option 1)
Note :
Lead Plating System
P : Pb Free
G : Green (Halogen Free and Pb Free)
Richtek products are :
 RoHS compliant and compatible with the current require-
ments of IPC/JEDEC J-STD-020.
 Suitable for use in SnPb or Pb-free soldering processes.
Copyright ©2014 Richtek Technology Corporation. All rights reserved.
DS9907-11 May 2014
24 23 22 21 20 19
COMP3 1
18 EN1
VDD3 2
17 ENM
LX3 3
PGND3 4
GND
16 VDD2
15 LX2
SS 5
RT 6
14 PGND2
25 _{13 LX1}
7 8 9 10 11 12
VQFN-24L 4x4
is a registered trademark of Richtek Technology Corporation.
www.richtek.com
1