RT9198-33GBR Datasheet, PDF (1/18 Pages) Richtek Technology Corporation – Low-Noise for RF Application, Fast Response in Line/Load Transient

RT9198/A
300mA, Low Noise, Ultra-Fast CMOS LDO Regulator
General Description
The RT9198/A is designed for portable RF and wireless
applications with demanding performance and space
requirements. The RT9198/A performance is optimized for
battery-powered systems to deliver ultra low noise and
low quiescent current. Regulator ground current increases
only slightly in dropout, further prolonging the battery life.
The RT9198/A also works with low-ESR ceramic
capacitors, reducing the amount of board space necessary
for power applications, critical in hand-held wireless
devices. The RT9198/A consumes less than 0.01uA in
shutdown mode and has fast turn-on time less than 50us.
The other features include ultra low dropout voltage, high
output accuracy, current limiting protection, and high ripple
rejection ratio. Available in the SOT-23-3, SOT-23-5,
TSOT-23-3, TSOT-23-5, SC-70-5, SC-82, MSOP-8 and
WDFN-6L 2x2 packages, the RT9198/A also offers a range
from 1.5V to 5.0V with 0.1V per step.
Features
z Low-Noise for RF Application
z Fast Response in Line/Load Transient
z Quick Start-Up (Typically 50us)
z < 0.01uA Standby Current When Shutdown
z Low Dropout : 220mV @ 300mA
z Wide Operating Voltage Ranges : 2.5V to 5.5V
z TTL-Logic-Controlled Shutdown Input
z Low Temperature Coefficient
z Current Limiting Protection
z Thermal Shutdown Protection
z Only 1uF Output Capacitor Required for Stability
z High Power Supply Rejection Ratio
z Custom Voltage Available
z RoHS Compliant and 100% Lead (Pb)-Free
Applications
z CDMA/GSM Cellular Handsets
z Battery-Powered Equipment
z Laptop, Palmtops, Notebook Computers
z Hand-Held Instruments
z PCMCIA Cards
z Portable Information Appliances
DS9198/A-14 April 2011
Ordering Information
RT9198/A-
Package Type
U5 : SC-70-5
U5R : SC-70-5 (R-Type)
Y : SC-82
V : SOT-23-3
B : SOT- 23-5
BR : SOT- 23-5 (R-Type)
BG : SOT- 23-5 (G-Type)
J3 : TSOT- 23-3
J5 : TSOT- 23-5
J5R : TSOT- 23-5 (R-Type)
J5G : TSOT- 23-5 (G-Type)
F : MSOP-8
QW : WDFN-6L 2x2 (W-Type)
Lead Plating System
P : Pb Free
G : Green (Halogen Free and Pb Free)
Output Voltage
15 : 1.5V
16 : 1.6V
:
49 : 4.9V
50 : 5.0V
1H : 1.85V
2H : 2.85V
4G : 4.75V
Note :
Chip Enable Function (Active Low)
Chip Enable Function (Active High)
Richtek products are :
` RoHS compliant and compatible with the current require-
ments of IPC/JEDEC J-STD-020.
` Suitable for use in SnPb or Pb-free soldering processes.
Marking Information
For marking information, contact our sales representative
directly or through a Richtek distributor located in your
area.
www.richtek.com
1