RT8016 Datasheet, PDF (1/14 Pages) Richtek Technology Corporation – 1.5MHz, 1A, High Efficiency PWM Step-Down DC/DC Converter

®
RT8016
1.5MHz, 1A, High Efficiency PWM Step-Down DC/DC
Converter
General Description
Features
The RT8016 is a high-efficiency Pulse-Width-Modulated
(PWM) step-down DC-DC converter. Capable of delivering
1A output current over a wide input voltage range from
2.5V to 5.5V, the RT8016 is ideally suited for portable
electronic devices that are powered from 1-cell Li-ion
battery or from other power sources such as cellular
phones, PDAs and hand-held devices.
Two operating modes are available including : PWM/Low-
Dropout autoswitch and shut-down modes, the Internal
synchronous rectifier with low R_DS(ON) dramatically reduces
conduction loss at PWM mode. No external Schottky
diode is required in practical application.
The RT8016 enters Low-Dropout mode when normal PWM
cannot provide regulated output voltage by continuously
turning on the upper PMOS. The RT8016 enters shut-
down mode and consumes less than 0.1uA when EN pin
is pulled low. The RT8016 also offers a range of 1V to
3.3V with 0.1V per step or adjustable output voltage by
two external resistor.
The switching ripple is easily smoothed-out by small
package filtering elements due to a fixed operating
frequency of 1.5MHz. This along with small WDFN-6L 2x2
package provides small PCB area application. Other
features include soft start, lower internal reference voltage
with 2% accuracy, over temperature protection, and over
current protection.
Pin Configurations
(TOP VIEW)
GND 1
EN 2
VIN 3
6 FB/VOUT
5 _GND
7 _{4 LX}
WDFN-6L 2x2
+2.5V to +5.5V Input Range
Adjustable Output From 0.6V to V_IN
1A Output Current
95% Efficiency
No Schottky Diode Required
1.5MHz Fixed Frequency PWM Operation
Small 6-Lead WDFN Package
RoHS Compliant and 100% Lead (Pb)-Free
Applications
Mobile Phones
Personal Information Appliances
Wireless and DSL Modems
MP3 Players
Portable Instruments
Ordering Information
RT8016-
Package Type
QW : WDFN-6L 2x2 (W-Type)
Lead Plating System
P : Pb Free
G : Green (Halogen Free and Pb Free)
Output Voltage
Default : Adjustable
10 : 1.0V
11 : 1.1V
:
32 : 3.2V
33 : 3.3V
Note :
Richtek products are :
` RoHS compliant and compatible with the current require-
ments of IPC/JEDEC J-STD-020.
` Suitable for use in SnPb or Pb-free soldering processes.
Marking Information
For marking information, contact our sales representative
directly or through a Richtek distributor located in your
area.
Copyright ©2012 Richtek Technology Corporation. All rights reserved.
DS8016-04 February 2012
is a registered trademark of Richtek Technology Corporation.
www.richtek.com
1