RT6296D Datasheet, PDF (1/13 Pages) Richtek Technology Corporation – The RT6296D is a high-efficiency

RT6296D
2A, 17V Current Mode Synchronous Step-Down Converter
General Description
The RT6296D is a high-efficiency, 2A current mode
synchronous step-down DC/DC converter with a wide
input voltage range from 4.5V to 17V. The device
integrates 100m high-side and 40m low-side
MOSFETs to achieve high efficiency conversion. The
current mode control architecture supports fast
transient response and internal compensation. A
cycle-by-cycle current limit function provides protection
against shorted output. The RT6296D provides
complete protection functions such as input
under-voltage lockout, output under-voltage protection,
over-current protection, and thermal shutdown. The
PWM frequency is adjustable by the EN/SYNC pin. The
RT6296D is available in the TSOT-23-8 (FC) package.
Ordering Information
RT6296D
Package Type
J8F : TSOT-23-8 (FC)
Lead Plating System
G : Green (Halogen Free and Pb Free)
Note :
Richtek products are :
 RoHS compliant and compatible with the current
requirements of IPC/JEDEC J-STD-020.
 Suitable for use in SnPb or Pb-free soldering processes.
Features
 4.5V to 17V Input Voltage Range
 2A Output Current
 Internal N-Channel MOSFETs
 Current Mode Control
 Fixed Switching Frequency : 800kHz
 Synchronous to External Clock : 200kHz to 2MHz
 Cycle-by-Cycle Current Limit
 Power Save Mode at Light Load
 External Soft-Start Function
 Input Under-Voltage Lockout
 Output Under-Voltage Protection
 Thermal Shutdown
Applications
 Industrial and Commercial Low Power Systems
 Computer Peripherals
 LCD Monitors and TVs
 Set-top Boxes
Marking Information
0D=DNN
0D= : Product Code
DNN : Date Code
Simplified Application Circuit
V_IN
Enable
C1
C2
C5
RT6296D
C3
VIN
BOOT
SW
EN/SYNC
PVCC
R5
FB
SS _GND
L1
R1
R2
V_OUT
C4
Copyright © 2015 Richtek Technology Corporation. All rights reserved.
DS6296D-00 July 2015
is a registered trademark of Richtek Technology Corporation.
www.richtek.com
1