RT1710 Datasheet, PDF (1/14 Pages) Richtek Technology Corporation – Cable ID for USB Type-C Cables

®
RT1710
Cable ID for USB Type-C Cables
General Description
RT1710 is a Type-C cable ID for active and passive cables.
All USB Full-Featured Type-C cables shall be electronically
marked. Electronically marked cables shall support USB
Power Delivery Structured VDM Discover Identity command
directed to SOP'. This provides a method to determine
the characteristics of the cable, e.g. its current carrying
capability, its performance, vendor identification, etc. This
may be referred to as the USB Type-C Cable ID function.
RT1710 is available in a WDFN-8L 2x3 package.
Ordering Information
RT1710
Package Type
QW : WDFN-8L 2x3 (W-Type)
Lead Plating System
G : Green (Halogen Free and Pb Free)
Note :
Richtek products are :
 RoHS compliant and compatible with the current require-
ments of IPC/JEDEC J-STD-020.
 Suitable for use in SnPb or Pb-free soldering processes.
Marking Information
13 : Product Code
13W
W : Date Code
Features
 Support SOP' Communication
 Integrated Transceiver (BMC PHY)
 Embedded Both Side RA Resistor
 Embedded Both Side ISO Diode
 Embedded MTP
 Support Multi-Tme Writable Memory to Store VDM
Data
 Support 4V to 5.5V Operation on VCON1 / VCON2
Pin
 Built-In Slew Rate Control for BMC Signal to Reduce
the Effect of EMI
 Support Custom Structured VDM Writing Through
CCIN Pin
 Support I²C Bus for Programming VDM Data
Applications
 USB Full-Featured Type-C cables
Pin Configurations
(TOP VIEW)
VCON1 1
CCIN 2
VCON2 3
GND 4
8 NC(DG0)
7 NC(DG1)
6 SCL
9 5 SDA
WDFN-8L 2x3
Simplified Application Circuit
VCONN
CC PIN
0.1µF 0.1µF
RT1710
VCON1
CCIN
VCON2
GND
NC
NC
SCL
SDA
VCONN
(Another side)
Test pad
Test pad
Copyright ©2016 Richtek Technology Corporation. All rights reserved.
DS1710-00 May 2016
is a registered trademark of Richtek Technology Corporation.
www.richtek.com
1