OFSRG-05-BLK Datasheet, PDF (1/1 Pages) Richco, Inc. – OFSRG - Optical Fiber Strain Relief Gland, Optical Fiber Duplexer

FIBER MANAGEMENT
OFSRG
Optical Fiber Strain Relief Gland
Features
• OFBLT retention: >100N
• Mid point or end termination of
OFBLT
• Provides secure fixing
Part No.
OFSRG-05-BLK
Ø ”D”
.59 (15.0)
Description
The Optical Fiber Strain Relief Gland enables
ruggedized patch cords, or fiber bundles,
protected in OFBLT to be anchored to a
chassis, or distribution trunking system, by
the simple provision of a single hole.
The OFBLT is passed through the gland and
is secured by the integral Tube Gripper Clip.
This ensures a pull out resistance of over
100N while still ensuring a 30mm radius
bend control and crush protection.
Miniflex technology manufactured by Richco - Patented
Material: PVC • Color: Black
Standard Pack: 10/bag
Ø ”d1”
Ø “d2”
Ø ”A”
.20 (5.0)
.47 (12.0)
.43 (11.0)
“H”
1.46 (37.0)
“W”
0.12 (3.0)
OFD
Optical Fiber Duplexer
Features
• Tube retention: >100N
• For a Development Kit containing
all adapters, order:
OFD-C-05-19BLK
Description
The Optical Fiber Duplexer enables cables with aramid strands to be broken out and mechanically terminated. It
provides an easy-to-use assembly with no crimping, while still retaining a minimum of a 100N pull. Used with the
5mm diameter OFBLT at the output port, it gives full blend control and crush protection for ongoing fibers. The
Duplexer gives an easy-to-use lay through facility with internal fiber radius control.
The Duplexer gives a range of input adapters to cover OFBLT, fiber bundles, cable and patch cords from
2.5mm to 7.00mm in diameter. For cables up to 10.8mm in diameter, a rubber sleeve is provided. See cable
size chart below.
Part Number
OFD series
“L“
1.95 (49.6)
“W“
0.64 (16.2)
“w“
0.52 (13.2)
“H“
0.31 (8.0)
“d“
0.20 (5.0)
Miniflex technology manufactured by Richco - Patented
Material: Flame Retardant Nylon, RMS-19 (UL 94V0); Color: Black
Part Number
Standard Pack: 10/bag
Incoming Cable Size Diameter
Adapter Color
OFD-C-1-05-19BLK
.098 - .138 (2.5 - 3.5)
Black
OFD-C-2-05-19BLK
.118 - .157 (3.0 - 4.0)
Blue
OFD-C-3-05-19BLK
.161 - .197 (4.1 - 5.0)
Brown
OFD-C-4-05-19BLK
.200 - .236 (5.1 - 6.0)
Green
OFD-C-5-05-19BLK
.240 - .276 (6.1 - 7.0)
Red
OFD-C-6-05-19BLK
.280 - .335 (7.1 - 8.5)
Black Rubber
OFD-C-9-05-19BLK
.335 - .425 (8.5 - 10.8)
Black Rubber
OFD-C-7-05-19BLK
.197 (5.0) OFBLT
Split Black
OFD-C-8-635-19BLK
.250 (6.35) OFBLT
Split Blue
OFCPA
Optical Fiber Cable and
Patch Cord Anchor
J
Features
• OFBLT retention: >100N
• The OFCPA can also be used as a
tube to tube uniter from OFBLT to
OFBLT
• For a Development Kit containing
all adapters order:
OFCPA-05-19BLK
Description
The Optical Fiber Cable and Patch Cord Anchor enables cables with aramid strands or similar strength
reinforcement to be mechanically terminated. It provides an easy-to-use assembly with no crimping, while still
retaining a minimum of 100N pull out. Up to 4 patch cords Ø2.5mm can be terminated in one anchor.
Part Number
“D” Ø
OFCPA series .51 (13.0)
“A”
.31 (8.0)
“d” Ø
.20 (5.0)
“L”
1.46 (37.0)
Miniflex Technology manufactured by Richco - Patented
Material: Flame Retardant Nylon 6/6 UL94 V0, RMS-19; Color: Black
Part Number
Standard Pack: 10/bag
Incoming Cable Size Diameter
Adapter Color
OFCPA-1-05-19BLK
.098 - .137 (2.5 - 3.5)
Black
OFCPA-2-05-19BLK
.118 - .157 (3.0 - 4.0)
Blue
OFCPA-3-05-19BLK
.161 - .196 (4.1 - 5.0)
Brown
OFCPA-4-05-19BLK
.200 - .236 (5.1 - 6.0)
Green
OFCPA-5-05-19BLK
.240 - .275 (6.1 - 7.0)
Red
OFCPA-6-05-19BLK
.280 - .335 (7.1 - 8.5)
Black Rubber
OFCPA-7-05-19BLK
.335 - .425 (8.5 - 10.8)
Black Rubber
OFCPA-T-05-19BLK
.196 (5.0) OFBLT
Split Black
OFCPA-T-635-19BLK
.196-.250 (5.0-6.35) OFBLT
Split Blue
206
773-539-4060 Samples: 1-800-621-1892