9401 Datasheet, PDF (2/2 Pages) RHOPOINT COMPONENTS – Surface Mount Reed Relays

9400-9800 Series/Surface Mount Reed Relays
Model Number
Parameters
Test Conditions
Units
9401
1 Form A
9402
9802
1 Form A 1 Form A
50 Ω Coaxial 50 Ω Coaxial
COIL SPECIFICATIONS
Nom. Coil Voltage
Max. Coil Voltage
Coil Resistance
Operate Voltage
Release Voltage
+/- 10%, 25° C
Must Operate by
Must Release by
CONTACT RATINGS
Switching Voltage
Switching Current
Carry Current
Contact Rating
Life Expectancy-Typical¹
Static Contact Resistance
(max. init.)
Dynamic Contact Resistance
(max. init.)
Max DC/Peak AC Resist.
Max DC/Peak AC Resist.
Max DC/Peak AC Resist.
Max DC/Peak AC Resist.
Signal Level 1.0V,10mA
50mV, 10mA
0.5V, 50mA
at 100 Hz, 1.5 msec
RELAY SPECIFICATIONS
Insulation Resistance
(minimum)
Capacitance - Typical
Across Open Contacts
Between all Isolated Pins
at 100V, 25°C, 40% RH
No Shield
Shield Floating
Shield Guarding
VDC
VDC
Ω
VDC - Max.
VDC - Min.
Volts
Amps
Amps
Watts
x 10⁶ Ops.
Ω
Ω
Ω
pF
pF
pF
5 12
6.2 15.0
200 825
3.75 9.0
0.4 1.0
200
0.5
1
10
250
0.125
0.150
x 10¹²
0.2
-
-
5 12
6.2 15.0
200 825
3.75 9.0
0.4 1.0
200
0.5
1
10
250
0.125
0.150
x 10¹²
-
0.4
0.1
5
6
150
3.8
0.4
100
0.25
0.5
3
250
0.125
0.150
x 10¹²
-
-
0.2
Open Contact to Coil
No Shield
pF
1.1
-
-
Shield Floating
pF
-
1.1
-
Shield Guarding
pF
-
0.1
0.5
Closed Contact to Coil
Contact to Shield
Dielectric Strength
(minimum)
Operate Time - including
bounce - Typical
Release Time - Typical
Shield Guarding
Contacts Open,
Shield Floating
Between Contacts
Contacts to Shield
Contacts/Shield to Coil
pF
pF
VDC/peak AC
VDC/peak AC
VDC/peak AC
At Nominal Coil Voltage,
30 Hz Square Wave
msec.
Zener-Diode Suppression³
msec.
-
-
300
-
1500
0.40
0.20
-
1.1
300
1500
1500
0.40
0.20
0.5
-
200
1500
1500
0.25
0.05
Top View:
Dot stamped on top of relay refers to pin #1 location
Notes:
1 _{Consult factory for life expectancy at other switching}
loads. Contact resistance 2.0Ω defines end of life.
2 _{Surface mount component processing temperature:}
430°F(221°C) max for 1 minute dwell time. Tempera
ture measured on leads where lead exits molded package.
3 _{Consists of 20V Zener-diode and 1N1002 diode in series,}
connected in parallel with coil.
Environmental Ratings²
Storage Temp: ^-35°C to ^+100°C; Operating Temp: ^-20°C to ^+85°C
The operate and release voltage and the coil resistance are
specified at 25°C. These values vary by approximately
0.4%/°C as the ambient temperature varies.
Vibration: 20 G’s to 2000 Hz; Shock: 50 G’s
COTO TECHNOLOGY RHOPOINT COMPONENTS LTD Holland Rd, Hurst Green, Oxted, Surrey, RH8 9AX,ENGLAND